/////////////////////////////////////////////////////////////////////////////
//
// Kodak Document Scanner TWAIN Source
// Custom Stuff...
//
// Copyright (c) 1998-2013 Eastman Kodak Company, All Rights Reserved
//
// Altering the information in this file is not authorized except
// with the express consent of Eastman Kodak Company. The values
// of the constants in this file are set at the discretion of
// Eastman Kodak Company. New constants may be added at any
// time and old ones may be removed or modified at any time.
//
// The capabilities contained in this header file are unique to the
// Kodak Digital Science(tm) Scanners. As such, the application
// has a responsibility to verify that it is communicating with
// this Source before attempting to use them. Verification is
// accomplished by examining the TW_IDENTITY structure returned by
// the Source from the DG_CONTROL / DAT_PARENT / MSG_OPENDS call.
// This Source reports its identity in the following fields:
//
// TW_IDENTITY
// Manufacturer "Eastman Kodak Company"
// Version.Info "KDS v#.#.# YYYY/MM/DD"
//
// By looking at the Manufacturer name, and looking for KDS as the
// first three letters in the Version.Info, it should be possible
// for an application to unambiguously identify this Source.
//
//
// The Family names break down into the following models...
//
// GEMINI (kds):
// 500, 500A,
// 900, 923, 990,
// 5500, 5520,
// 7500, 7520, 7550, 7560,
// 9500, 9520
//
// VIPER (kds):
// 3500, 3510, 3520, 3590,
// 4500
//
// PRISM (kds_i800):
// i810, i820, i830, i840
//
// PHOENIX (kds_i600):
// i610, i620, i640, i660
//
// ALIEN (kds_i200):
// i250, i260, i280
//
// Alf (kds_i100):
// i150, i160
//
// Pony (kds_i30_i40):
// i30, i40, i40T
//
// MUSTANG2 (kds_i55_i65):
// i55, i65
//
// PIRANHA (kds_i1300):
// i1310, i1320
//
// PIRANHA1200 (kds_i1200):
// i1210, i1220
//
// WILDFIRE (kds_i1800):
// i1840, i1860
//
// A2O2 (kds_i1400):
// i1410, i1420, i1440
//
// Fosters (kds_i1100):
// i1120
//
// Inferno (kds_i700):
// i720, i730, i750, i780
//
// Panther (kds_i4200_i4600):
// i4200, i4600
//
// Blaze (kds_i5000):
// i5200, i5600, i5800
//
// Piranha2 (kds_i2000):
// i2400, i2600, i2800
//
// Rufous (kds_i900):
// i920
//
// FalconA4 (kds_i2900):
// i2900
//
// FalconA3 (kds_i3000):
// i3000
//
// Piranha2stw (kds_pss): [Note: This scanner family supports the same
// PS50, PS80 list of capabilities as the Piranha2
// (kds_i2000) scanner family.]
//
// For more information about these capabilities and the driver,
// please refer to the Integrator's Guide on the media that came
// with your scanner.
//
// **************************************************************
// This file does not conform to the 2-byte packing rule for
// TWAIN, it should use the default packing for the compiler...
// **************************************************************
//
/////////////////////////////////////////////////////////////////////////////
#ifndef KDSCUST_H
#define KDSCUST_H
////////////////////////////////////////////////////////////////////////////////
// INCLUDE FILES
////////////////////////////////////////////////////////////////////////////////
#ifdef _WIN32
#include "twain.h"
#endif
////////////////////////////////////////////////////////////////////////////////
// DEFINES, TYPEDEFS, CONSTS & ENUMS
////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////
// CAP Section
////////////////////////////////////////////////////////////////////////////////
// CAP_BACKGROUND
// Family: A2O2, Alf, Blaze, Falcon, Fosters, Inferno, Mustang2, Panther,
// Phoenix, Piranha, Piranha2, Rufous, Wildfire
// Type: TWTY_INT16
// Container: Enumeration
// Allowed: TWBK_BLACK, TWBK_WHITE
// Default: (scanner dependent)
// Notes: Reports what the scanner background was at the
// time the scanner was started. This capability
// cannot detect a "hot" change.
// For Blaze and Panther, it allows the user to select the color
// of the imaging background. This can be set differently per side.
#define CAP_BACKGROUND 0x8089
#define TWBK_BLACK 0
#define TWBK_WHITE 1
// CAP_BACKGROUNDFRONT
// Family: A2O2, Alf, Blaze, Falcon, Fosters, Panther, Piranha, Piranha2,
// Rufous
// Type: TWTY_INT16
// Container: Enumeration
// Allowed: TWBF_BLACK, TWBF_WHITE
// Default: (scanner dependent)
// Notes: Reports what the scanner front background was at the
// time the scanner was started. This capability
// cannot detect a "hot" change.
#define CAP_BACKGROUNDFRONT 0x808C
#define TWBF_BLACK 0
#define TWBF_WHITE 1
// CAP_BACKGROUNDREAR
// Family: A2O2, Alf, Blaze, Falcon, Fosters, Panther, Piranha, Piranha2,
// Rufous
// Type: TWTY_INT16
// Container: Enumeration
// Allowed: TWBR_BLACK, TWBR_WHITE
// Default: (scanner dependent)
// Notes: Reports what the scanner rear background was at the
// time the scanner was started. This capability
// cannot detect a "hot" change.
#define CAP_BACKGROUNDREAR 0x808D
#define TWBR_BLACK 0
#define TWBR_WHITE 1
// CAP_BACKGROUNDPLATEN
// Family: n/a
// Type: TWTY_INT16
// Container: Enumeration
// Allowed: TWBP_BLACK, TWBP_WHITE
// Default: (scanner dependent)
// Notes: Reports what the scanner background was at the
// time the scanner was started. This capability
// cannot detect a "hot" change.
// This capability is not available at this time.
#define CAP_BACKGROUNDPLATEN 0x808E
#define TWBP_BLACK 0
#define TWBP_WHITE 1
// CAP_BATCHCOUNT
// Family: Prism, Wildfire
// Type: TWTY_FIX32
// Container: Range
// Allowed: 0 - 32767
// Default: 0
// Notes: Count of CAP_BATCHLEVEL's...
#define CAP_BATCHCOUNT 0x802B
// CAP_BATCHENDFUNCTION
// Family: Prism, Wildfire
// Type: TWTY_INT16
// Container: Enumeration (per camera)
// Allowed: TWPL_NONE, TWPL_LEVEL1, TWPL_LEVEL2, TWPL_LEVEL3
// Default: TWPL_NONE
// Notes: Determines the level that batching will count
// and test against the batch counting value.
#define CAP_BATCHENDFUNCTION 0x804F
#define TWBE_NONE 0
#define TWBE_STOPFEEDER 1
#define TWBE_ENDOFJOB 2
#define TWBE_NEWBATCH 3
// CAP_BATCHLEVEL
// Family: Prism, Wildfire
// Type: TWTY_INT16
// Container: Enumeration (per camera)
// Allowed: TWPL_LEVEL1, TWPL_LEVEL2, TWPL_LEVEL3
// Default: TWPL_LEVEL1
// Notes: Determines the level that batching will count
// and test against the batch counting value.
#define CAP_BATCHLEVEL 0x804E
// CAP_BATCHSTARTFUNCTION
// Family: Prism, Wildfire
// Type: TWTY_INT16
// Container: Enumeration (per camera)
// Allowed: TWPL_NONE, TWPL_LEVEL1, TWPL_LEVEL2, TWPL_LEVEL3
// Default: TWPL_NONE
// Notes: Level that a batch should start in...
#define CAP_BATCHSTARTFUNCTION 0x803F
// CAP_BINARIZATION
// Family: Viper (3590 only)
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Controls the presence of binarization in the
// camera control. It also overrides the value
// of the front bitonal CAP_CAMERAENABLE.
#define CAP_BINARIZATION 0x8030
// CAP_BLANKPAGE
// Family: A2O2, Blaze, Falcon, Fosters, Inferno, Mustang2, Panther, Phoenix,
// Piranha, Piranha2, Pony, Rufous, Wildfire
// Type: TW_UINT16
// Container: Enumeration
// Allowed: TWBP_IMAGE
// Default: TWBP_IMAGE
// Notes: Blank image deletion (values 0 and 2 can not used, they became obsolete)
#define CAP_BLANKPAGE 0x809A
#define TWBP_IMAGE 1
// CAP_BLANKPAGEMODE
// Family: A2O2, Blaze, Falcon, Fosters, Inferno, Mustang2, Panther, Phoenix,
// Piranha, Piranha2, Pony, Rufous, Wildfire
// Type: TW_UINT16
// Container: Enumeration
// Allowed: TWBM_NONE, TWBM_COMPSIZE, TWBM_CONTENT
// Default: TWBM_NONE
// Notes: Blank image deletion mode. Not all values are supported on all scanners.
#define CAP_BLANKPAGEMODE 0x809B
#define TWBM_COMPSIZE 0
#define TWBM_NONE 1
#define TWBM_CONTENT 2
// CAP_BLANKPAGECOMPSIZEBW
// Family: A2O2, Blaze, Falcon, Fosters, Inferno, Mustang2, Panther, Phoenix,
// Piranha, Piranha2, Pony, Rufous, Wildfire
// Type: TW_UINT32
// Container: Range
// Allowed: 0 to 1000KB
// Default: 0
// Notes: Delete Bitonal image if the final size is less than specific amount.
// Value needs to be in 1024 increments
// The front and rear values must be the same on Mustang2 and Pony
// When set to a non-zero value: CAP_BLANKPAGEMODE is automatically
// set to TWBM_COMPSIZE
// If set zero and CAP_BLANKPAGECOMPSIZEBW and CAP_BLANKPAGECOMPSIZEGRAY
// are zero, then CAP_BLANKPAGEMODE is automatically changed to TWBM_NONE
#define CAP_BLANKPAGECOMPSIZEBW 0x809C
// CAP_BLANKPAGECOMPSIZEGRAY
// Family: A2O2, Blaze, Falcon, Fosters, Inferno, Mustang2, Panther, Phoenix,
// Piranha, Piranha2, Pony, Rufous, Wildfire
// Type: TW_UINT32
// Container: Range
// Allowed: 0 to 1000KB
// Default: 0
// Notes: Delete Gray image if the final size is less than specific amount.
// Value needs to be in 1024 increments
// The front and rear values must be the same on Mustang2 and Pony
// When set to a non-zero value: CAP_BLANKPAGEMODE is automatically
// set to TWBM_COMPSIZE
// If set zero and CAP_BLANKPAGECOMPSIZEBW and CAP_BLANKPAGECOMPSIZEGRAY
// are zero, then CAP_BLANKPAGEMODE is automatically changed to TWBM_NONE
#define CAP_BLANKPAGECOMPSIZEGRAY 0x809D
// CAP_BLANKPAGECOMPSIZERGB
// Family: A2O2, Blaze, Falcon, Fosters, Inferno, Mustang2, Panther, Phoenix,
// Piranha, Piranha2, Pony, Rufous, Wildfire
// Type: TW_UINT32
// Container: Range
// Allowed: 0 to 1000KB
// Default: 0
// Notes: Delete Color image if the final size is less than specific amount.
// Value needs to be in 1024 increments
// The front and rear values must be the same on Mustang2 and Pony
// When set to a non-zero value: CAP_BLANKPAGEMODE is automatically
// set to TWBM_COMPSIZE
// If set zero and CAP_BLANKPAGECOMPSIZEBW and CAP_BLANKPAGECOMPSIZEGRAY
// are zero, then CAP_BLANKPAGEMODE is automatically changed to TWBM_NONE
#define CAP_BLANKPAGECOMPSIZERGB 0x809E
// CAP_BLANKPAGECONTENT
// Family: A2O2, Blaze, Falcon, Panther, Piranha, Piranha2
// Type: TW_UINT32
// Container: Range
// Allowed: 0 to 100
// Default: 0
// Notes: If the percent of content on the image is less than or equal to
// this amount, the image will be deleted. This is only valid when
// CAP_BLANKPAGEMODE is set to TWBM_CONTENT
#define CAP_BLANKPAGECONTENT 0x80C4
// CAP_CAMERAENABLE
// Family: A2O2, Alf, Alien, Blaze, Falcon, Fosters, Inferno, Mustang2,
// Panther, Phoenix, Piranha, Piranha2, Pony, Prism,
// Rufous, Wildfire, Viper
// Type: TWTY_BOOL
// Container: OneValue (per camera)
// Allowed: TRUE / FALSE
// Default: TRUE (except for the 3590 front bitonal)
// Notes: Controls the delivery of images. If this capability
// is set to TRUE then the Source will deliver an image
// for this camera during scanning. You need to use
// DAT_FILESYSTEM to address each of the cameras.
#define CAP_CAMERAENABLE 0x801D
// CAP_CAMERAORDER
// Family: A2O2, Alf, Alien, Blaze, Falcon, Fosters, Inferno,
// Mustang2, Panther, Phoenix, Piranha, Piranha2, Pony,
// Prism, Rufous, Wildfire, Viper
// Type: TWTY_UINT16
// Container: Array
// Allowed: TWCM_BW_BOTH, TWCM_CL_BOTH
// Default: TWCM_CL_BOTH, TWCM_BW_BOTH
// Notes: Selects the ordering of the cameras according to the
// order that they appear in the list. So the default
// indicates that a color front or rear will precede a
// bitonal front or rear.
//
// There is a conflict between the standard TWAIN CAP_CAMERAORDER and
// the Kodak custom CAP_CAMERAORDER. The standard version has a value
// of 0x1037 and uses the TWPT_* values. The Kodak version can be seen
// below. This driver does not support the TWAIN 2.0 version of this
// capability. An application must use the Kodak version to talk to a
// Kodak driver.
#ifdef CAP_CAMERAORDER
#undef CAP_CAMERAORDER
#endif
#define CAP_CAMERAORDERSTANDARD 0x1037
#define CAP_CAMERAORDER 0x801E
#define TWCM_BW_BOTH 0
#define TWCM_BW_TOP 1
#define TWCM_BW_BOTTOM 2
#define TWCM_CLBW_BOTH 3
#define TWCM_CL_TOP 4
#define TWCM_CL_BOTTOM 5
#define TWCM_CL_BOTH 6
#define TWCM_GR_TOP 7
#define TWCM_GR_BOTTOM 8
#define TWCM_GR_BOTH 9
// CAP_CHECKDIGIT
// Family: Prism, Wildfire
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: TRUE
// Notes: To set the check image address digit ON/OFF.
#define CAP_CHECKDIGIT 0x808B
// CAP_DOCUMENTCOUNT
// Family: Gemini
// Type: TWTY_STR32
// Container: OneValue
// Allowed: 0 - 999,999,999
// Default: 0
// Notes: 5000/7000/9000 only. Sets the document count, but
// only if CAP_PRINTERENABLED is either undefined or
// set to FALSE.
#define CAP_DOCUMENTCOUNT 0x8017
// CAP_DOCUMENTCOUNTENABLED
// Family: Gemini
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: 5000/7000/9000 only. Determines whether or not
// the CAP_DOCUMENTCOUNT is to be downloaded.
#define CAP_DOCUMENTCOUNTENABLED 0x8018
// CAP_DOUBLEFEEDENDJOB
// Family: Inferno, Blaze, Falcon, Panther, Phoenix, Piranha2, Prism,
// Wildfire
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: TRUE
// Notes: Controls the action the scanner takes when a double
// feed is detected. A value of TRUE will cause the
// session to be terminated. A value of FALSE will
// cause the multifeed to be ignored (though an audible
// alarm will still be sounded, if it is turned on).
#define CAP_DOUBLEFEEDENDJOB 0x806E
// CAP_DOUBLEFEEDSTOP
// Family: A2O2, Alf, Alien, Blaze, Falcon, Fosters, Inferno,
// Mustang2, Panther, Phoenix, Piranha, Piranha2, Pony, Prism,
// Rufous, Wildfire, Viper
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: TRUE
// Notes: Controls the action the scanner takes when a double
// feed is detected. A value of TRUE will cause the
// session to be terminated. A value of FALSE will
// cause the multifeed to be ignored (though an audible
// alarm will still be sounded, if it is turned on).
#define CAP_DOUBLEFEEDSTOP 0x8056
// CAP_DUALSTACKINGENABLED
// Family: Blaze
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Indicates if the Controlled Dual Stacking Accessory is
// enabled. It can only be enabled if the accessory is
// installed.
#define CAP_DUALSTACKINGENABLED 0x8110
// CAP_DUALSTACKINGLENGTHMODE
// Family: Blaze
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: Scanner specific
// Default: TWDSLM_NONE
// Notes: Indicates the length method being used to make document sorting decisions
// for the Controlled Dual Stacking Accessory. The stacking length mode
// only has meaning if CAP_DUALSTACKINGENABLED is TRUE.
#define CAP_DUALSTACKINGLENGTHMODE 0x8111
#define TWDSLM_NONE 0
#define TWDSLM_LESSTHAN 1
#define TWDSLM_GREATERTHAN 2
#define TWDSLM_BETWEEN 3
// CAP_DUALSTACKINGLENGTH1
// Family: Blaze
// Type: TWTY_FIX32
// Container: Range
// Allowed: Scanner-specific
// Default: Scanner-specific (min range value)
// Notes: Dual stacking length1 (in ICAP_UNITS).
// If CAP_DUALSTACKINGLENGTHMODE is "less than", then any documents shorter
// than this value will be placed in the selected CAP_DUALSTACKINGSTACK.
// If CAP_DUALSTACKINGLENGTHMODE is "greater than", then any documents longer
// than this value will be placed in the selected CAP_DUALSTACKINGSTACK.
// If CAP_DUALSTACKINGLENGTHMODE is "between", then any documents longer than
// this value and shorter than CAP_DUALSTACKINGLENGTH2 will be placed in the
// selected CAP_DUALSTACKINGSTACK.
// Only valid if CAP_DUALSTACKINGENABLED is TRUE and CAP_DUALSTACKINGLENGTHMODE
// is set to any value other than TWDSLM_NONE.
// The range is determined by the scanner, so an application
// might want to ask what the range is.
#define CAP_DUALSTACKINGLENGTH1 0x8112
// CAP_DUALSTACKINGLENGTH2
// Family: Blaze
// Type: TWTY_FIX32
// Container: Range
// Allowed: Scanner-specific
// Default: Scanner-specific (min range value)
// Notes: Dual stacking length2 (in ICAP_UNITS).
// If CAP_DUALSTACKINGLENGTHMODE is "between", then any documents longer than
// CAP_DUALSTACKINGLENGTH1 and shorter than CAP_DUALSTACKINGLENGTH2 will be
// placed in the selected CAP_DUALSTACKINGSTACK.
// Only valid if CAP_DUALSTACKINGENABLED is TRUE and CAP_DUALSTACKINGLENGTHMODE
// is set to TWDSLM_BETWEEN.
// The range is determined by the scanner, so an application
// might want to ask what the range is.
#define CAP_DUALSTACKINGLENGTH2 0x8113
// CAP_DUALSTACKINGMULTIFEED
// Family: Blaze
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Indicates if Multifeed documents should be placed in
// the selected CAP_DUALSTACKINGSTACK.
// Only valid if CAP_DUALSTACKINGENABLED is TRUE.
#define CAP_DUALSTACKINGMULTIFEED 0x8114
// CAP_DUALSTACKINGPATCHTRANSFER
// Family: Blaze
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Indicates if Patch Type Transfer documents should be placed in
// the selected CAP_DUALSTACKINGSTACK.
// Only valid if CAP_DUALSTACKINGENABLED is TRUE.
#define CAP_DUALSTACKINGPATCHTRANSFER 0x8115
// CAP_DUALSTACKINGPATCHTYPE1
// Family: Blaze
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Indicates if Patch Type 1 documents should be placed in
// the selected CAP_DUALSTACKINGSTACK.
// Only valid if CAP_DUALSTACKINGENABLED is TRUE.
#define CAP_DUALSTACKINGPATCHTYPE1 0x8116
// CAP_DUALSTACKINGPATCHTYPE2
// Family: Blaze
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Indicates if Patch Type 2 documents should be placed in
// the selected CAP_DUALSTACKINGSTACK.
// Only valid if CAP_DUALSTACKINGENABLED is TRUE.
#define CAP_DUALSTACKINGPATCHTYPE2 0x8117
// CAP_DUALSTACKINGPATCHTYPE3
// Family: Blaze
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Indicates if Patch Type 3 documents should be placed in
// the selected CAP_DUALSTACKINGSTACK.
// Only valid if CAP_DUALSTACKINGENABLED is TRUE.
#define CAP_DUALSTACKINGPATCHTYPE3 0x8118
// CAP_DUALSTACKINGPATCHTYPE4
// Family: Blaze
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Indicates if Patch Type 4 documents should be placed in
// the selected CAP_DUALSTACKINGSTACK.
// Only valid if CAP_DUALSTACKINGENABLED is TRUE.
#define CAP_DUALSTACKINGPATCHTYPE4 0x8119
// CAP_DUALSTACKINGPATCHTYPE6
// Family: Blaze
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Indicates if Patch Type 6 documents should be placed in
// the selected CAP_DUALSTACKINGSTACK.
// Only valid if CAP_DUALSTACKINGENABLED is TRUE.
#define CAP_DUALSTACKINGPATCHTYPE6 0x811A
// CAP_DUALSTACKINGSTACK
// Family: Blaze
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: Scanner specific
// Default: TWDSS_STACK1
// Notes: Which stack a document should drop into
// based on stacking criteria. Only valid if
// CAP_DUALSTACKINGENABLED is TRUE.
#define CAP_DUALSTACKINGSTACK 0x811B
#define TWDSS_STACK1 1
#define TWDSS_STACK2 2
// CAP_EASYSTACKING
// Family: Inferno, Phoenix, Wildfire
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: If set to TRUE then the scanner makes adjustments
// to improve the arrangement of the output stack as
// the paper exits the transport.
#define CAP_EASYSTACKING 0x8075
// CAP_ENABLECOLORPATCHCODE
// Family: Viper (3590)
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Controls recognition of the 3590 patch page.
#define CAP_ENABLECOLORPATCHCODE 0x8054
// CAP_ENERGYSTAR
// Family: A2O2, Alf, Alien, Blaze, Falcon, Fosters, Inferno, Mustang2,
// Panther, Phoenix, Piranha, Piranha2, Pony, Rufous, Wildfire
// Type: TWTY_INT32
// Container: Range
// Allowed: Alien: 0, 15 - 60 (minutes)
// Alf/Inferno/Mustang2/Phoenix/Pony/Wildfire: 0, 5 - 60 (minutes)
// A2O2/Fosters/Piranha: 0, 5 - 240 (minutes)
// Blaze/Panther/Piranha2: 5 - 240 (minutes)
// Falcon/Rufous: 1 - 240 (minutes)
// Default: 15
// Notes: Minutes of idle time before Energy Star kicks in...
#define CAP_ENERGYSTAR 0x802F
// CAP_FEEDERKEEPALIVE
// Family: Viper
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Controls the behavior of the feeder in the following way:
//
// State ICAP_XFERCOUNT First Page All Other Pages
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// FALSE -1 Timeout Timeout
// FALSE >0 Timeout Timeout
// TRUE -1 Keep Alive Timeout
// TRUE >0 Keep Alive Timeout
//
// The effect when TRUE from the user's perspective is that if the
// transport times out while waiting for the first sheet of paper,
// the Source will reenable the scanner, and start the transport
// back up again. It will continue to do this until it gets the
// first sheet of paper, or until the user stops the scanner from
// the application.
#define CAP_FEEDERKEEPALIVE 0x8001
// CAP_FEEDERMODE
// Family: A2O2 (i1440), Alien (i280), Blaze, Falcon, Panther, Piranha2
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: A2O2, Alien: TWFM_NONE, TWFM_SPECIAL
// Others: Scanner specific
// Default: A2O2, Alien: TWFM_NONE
// Others: Scanner specific
// Notes: Selects TWFM_NONE will show Off on the UI
// and TWFM_SPECIAL is On on the UI
// CAP_FEEDERMODE is for Special Document
#define CAP_FEEDERMODE 0x806F
#define TWFM_NONE 0
#define TWFM_SPECIAL 1
#define TWFM_STACKINGIMPROVED 2
#define TWFM_STACKINGBEST 3
#define TWFM_FRAGILE 4
#define TWFM_LIGHTWEIGHT 5
#define TWFM_THICK 6
#define TWFM_THIN 7
// CAP_FIXEDDOCUMENTSIZE
// Family: Viper (not 3500)
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Controls the scanner speed-up feature. Note that this
// feature cannot be used with overscan. And it does
// require that all the documents in the batch be of the
// same size.
#define CAP_FIXEDDOCUMENTSIZE 0x8055
// CAP_FOLDEDCORNER
// Family: Inferno, Phoenix
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: TWFC_DISABLED, TWFC_STOP, TWFC_ENDOFJOB
// Default: TWFC_DISABLED
// Notes: Controls Folded Corner detection and the action taken
// if one is discovered during scanning...
#define CAP_FOLDEDCORNER 0x8070
#define TWFC_DISABLED 0
#define TWFC_STOPFEEDER 1
#define TWFC_ENDOFJOB 2
#define TWCC_FOLDEDCORNER 0x8001
#define TWDE_FOLDEDCORNER 0x8001
// CAP_FOLDEDCORNERSENSITIVITY
// Family: Inferno, Phoenix
// Type: TWTY_UINT16
// Container: Range
// Allowed: 1 - 100
// Default: 2
// Notes: Controls the folded corner sensitivity, if folder
// corner detection is turned on...
#define CAP_FOLDEDCORNERSENSITIVITY 0x8071
// CAP_FUNCTIONKEY*
// Family: Prism, Wildfire
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: (see list below)
// Default: TWFK_NONE
// Notes: i800 series only. Controls the action taken by the
// function keys during a scanning session...
#define CAP_FUNCTIONKEY1 0x8037
#define CAP_FUNCTIONKEY2 0x8038
#define CAP_FUNCTIONKEY3 0x8039
#define CAP_FUNCTIONKEY4 0x803A // not used
#define TWFK_NONE 0
#define TWFK_ENDOFJOB 1
#define TWFK_TERMINATEBATCH 2
#define TWFK_SKIPMULTIFEED 3
#define TWFK_SKIPPRINTING 4
#define TWFK_SKIPPATCH 5
#define TWFK_LOWERELEVATOR 6
// CAP_IMAGEADDRESS
// Family: Gemini, Prism, Wildfire
// Type: TWTY_STR255
// Container: OneValue
// Allowed: The image address string...
// Default: Scanner Next Image Address (read from device)
// Notes: 800/5000/7000/9000 only. Sets the image address.
#define CAP_IMAGEADDRESS 0x8015
// CAP_IMAGEADDRESSENABLED
// Family: Gemini
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: 5000/7000/9000 only. Determines whether or not
// the CAP_IMAGEADDRESS is to be downloaded.
#define CAP_IMAGEADDRESSENABLED 0x8016
// CAP_IMAGEADDRESSTEMPLATES
// Family: Prism, Wildfire
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: (see below)
// Default: TWIA_1
// Notes: 800 only. Determines what kind of image address
// format is allowed. See CONST.INI for the user
// selectable list of formats, and the language files
// L_XX_XXX.INI for the associated text in the image
// address presets dropdown list. Note that, like
// with ICAP_HALFTONES and ICAP_SUPPORTEDSIZES, it is
// not really possible for an application to know
// what the user is selecting, it just has to be
// accepted blindly.
#define CAP_IMAGEADDRESSTEMPLATES 0x803E
#define TWIA_CUSTOM -1
#define TWIA_NONE 0
#define TWIA_1 1
#define TWIA_2 2
#define TWIA_3 3
#define TWIA_4 4
#define TWIA_5 5
#define TWIA_6 6
#define TWIA_7 7
#define TWIA_8 8
#define TWIA_9 9
#define TWIA_10 10
#define TWIA_11 11
#define TWIA_12 12
#define TWIA_13 13
#define TWIA_14 14
#define TWIA_15 15
#define TWIA_16 16
// CAP_IMAGEADDRESS_A
// CAP_IMAGEADDRESS_B
// CAP_IMAGEADDRESS_C
// CAP_IMAGEADDRESS_D
// Family: Prism, Wildfire
// Type: TWTY_STR255
// Container: OneValue
// Allowed: The image address template fields...
// Default: (see CAP_IMAGEADDRESSTEMPLATES)
// Notes: 800 only. Specifies the meaning and the maximum sizes
// of the fields in the image address. A value of 'f'
// indicates a fixed field. Values of 1, 2, 3 indicate
// level fields. The number of characters determines the
// maximum allowed in that field.
#define CAP_IMAGEADDRESS_A 0x804A
#define CAP_IMAGEADDRESS_B 0x804B
#define CAP_IMAGEADDRESS_C 0x804C
#define CAP_IMAGEADDRESS_D 0x804D
// CAP_IMAGEMERGE
// Family: A2O2, Falcon, Fosters, Panther, Piranha, Piranha2, Rufous
// Type: TW_UINT16
// Container: Enumeration
// Allowed: TWIM_NONE, TWIM_FRONTONTOP, TWIM_FRONTONBOTTOM,
// TWIM_FRONTONLEFT, TWIM_FRONTONRIGHT
// Default: TWIM_NONE
// Notes: Merges the front and back images into a single image that is
// returned to the application.
#define CAP_IMAGEMERGE 0x80C5
#define TWIM_NONE 0
#define TWIM_FRONTONTOP 1 // front is on top of the back
#define TWIM_FRONTONBOTTOM 2 // back is on top of front
#define TWIM_FRONTONLEFT 3 // front is to the left of the back
#define TWIM_FRONTONRIGHT 4 // back is to the left of the front
// CAP_IMAGESDIFFERENT
// Family: Blaze, Falcon, Panther, Piranha2
// Type: TWTY_BOOL
// Container: OneValue (per camera)
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: When this is TRUE the user can set different values for the
// color and bitonal cameras. When set to FALSE a value set
// on a color camera will be matched (if possible) by the bitonal
// camera, and vice versa.
#define CAP_IMAGESDIFFERENT 0x8100
// CAP_INDICATORSWARMUP
// Family: A2O2, Alf, Alien, Blaze, Falcon, Fosters, Inferno, Mustang2,
// Panther, Phoenix, Piranha, Piranha2, Pony, Rufous,
// Wildfire
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: TRUE
// Notes: Controls the appearance of the LampSaver and Warmup
// dialogs. Only turn this off if these dialogs are
// interfering with the operation of your application.
// For version 9.3 drivers and up, if lamps are not
// warmed-up at scan time, your application can be told
// the number of seconds remaining before scanning will
// begin; refer to TWDE_LAMPWARMUP in CAP_DEVICEEVENT
// for more information.
#define CAP_INDICATORSWARMUP 0x806C
// CAP_INTELLIGENTDOCUMENTPROTECTION
// Family: Falcon
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: See below...
// Default: TWIDP_NORMAL
// Notes: ADF only. Controls the level of document protection.
#define CAP_INTELLIGENTDOCUMENTPROTECTION 0x810D
#define TWIDP_NONE 0
#define TWIDP_MINIMUM 1
#define TWIDP_NORMAL 2
#define TWIDP_MAXIMUM 3
// CAP_LEVELTOFOLLOW1
// CAP_LEVELTOFOLLOW2
// CAP_LEVELTOFOLLOW3
// Family: Prism, Wildfire
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: TWPL_LEVEL1, TWPL_LEVEL2, TWPL_LEVEL3
// Default: TWPL_LEVEL1
// Notes: For Image Addressing, determines dependencies among the
// level counters.
#define CAP_LEVELTOFOLLOW1 0x803B
#define CAP_LEVELTOFOLLOW2 0x803C
#define CAP_LEVELTOFOLLOW3 0x803D
// CAP_MODE
// Family: Gemini
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: (see list below)
// Default: TWMO_MODE1
// Notes: Selects the current mode.
#define CAP_MODE 0x8019
#define TWMO_MODE1 1
#define TWMO_MODE2 2
#define TWMO_MODE3 3
#define TWMO_MODE4 4
#define TWMO_MODE5 5
#define TWMO_MODE6 6
#define TWMO_MODE7 7
#define TWMO_MODE8 8
#define TWMO_MODE9 9
#define TWMO_MODE10 10
#define TWMO_MODE11 11
#define TWMO_MODE12 12
#define TWMO_MODE13 13
#define TWMO_MODE14 14
#define TWMO_MODE15 15
#define TWMO_MODE16 16
#define TWMO_MODE17 17
#define TWMO_MODE18 18
// CAP_MULTIFEEDCOUNT
// Family: A2O2, Falcon, Fosters, Blaze, Inferno, Mustang2, Panther, Phoenix,
// Piranha, Piranha2, Pony, Rufous, Wildfire
// Type: TWTY_INT32
// Container: OneValue
// Allowed: 0 - 32767
// Default: 0
// Notes: Count of multifeeds per scan session
#define CAP_MULTIFEEDCOUNT 0x8086
// CAP_MULTIFEEDRESPONSE
// Family: A2O2, Falcon, Fosters, Blaze, Inferno, Panther, Phoenix, Piranha,
// Piranha2, Rufous, Wildfire
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: Fosters - TWMR_CONTINUE, TWMR_ENDOFJOB
// Inferno/Phoenix/Wildfire - TWMR_CONTINUE, TWMR_ENDOFJOB, TWMR_STOPFEEDER
// A2O2/Piranha - TWMR_CONTINUE, TWMR_ENDOFJOB, TWMR_ENDOFJOBLEAVEPAPER
// Piranha2/Rufous - TWMR_CONTINUE, TWMR_ENDOFJOB, TWMR_ENDOFJOBLEAVEPAPER,
// TWMR_ENDOFJOBGENERATEIMAGE
// Blaze/Falcon/Panther - TWMR_CONTINUE, TWMR_ENDOFJOB, TWMR_ENDOFJOBLEAVEPAPER,
// TWMR_ENDOFJOBGENERATEIMAGE, TWMR_STOPFEEDER,
// TWMR_STOPFEEDERLEAVEPAPER
// Default: TWMR_ENDOFJOB
// Notes: Selects action taken when the multifeed detected.
#define CAP_MULTIFEEDRESPONSE 0x80BA
#define TWMR_CONTINUE 0
#define TWMR_ENDOFJOB 1
#define TWMR_ENDOFJOBLEAVEPAPER 2
#define TWMR_STOPFEEDER 3
#define TWMR_STOPFEEDERLEAVEPAPER 4
#define TWMR_ENDOFJOBGENERATEIMAGE 5
// CAP_MULTIFEEDSOUND
// Family: A2O2, Alf, Alien, Blaze, Falcon, Fosters, Inferno, Mustang2,
// Panther, Phoenix, Piranha, Piranha2, Pony, Rufous,
// Wildfire
// Type: TWTY_STR255
// Container: OneValue
// Allowed: Text
// Default: "ding.wav"
// Notes: Sound when detect document multifeeds.
#define CAP_MULTIFEEDSOUND 0x802D
// CAP_MULTIFEEDTHICKNESSDETECTION
// Family: Viper (not 3500)
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Controls the whether thickness is used to detect
// document multifeeds.
#define CAP_MULTIFEEDTHICKNESSDETECTION 0x8057
// CAP_NOWAIT
// Family: A2O2, Alf, Alien, Blaze, Gemini, Falcon, Fosters, Inferno,
// Mustang2, Panther, Phoenix, Piranha, Piranha2, Pony, Prism,
// Rufous, Wildfire, Viper
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Legacy behavior for this Source is to wait inside
// of the MSG_ENDXFER command until the next image
// is scanned or until the session is terminated, so
// that it can properly set the value of the
// TW_PENDINGXFERS.Count field. This has the unhappy
// side-effect of hanging the application.
//
// This capability allows the application to issue a
// non-blocking call to MSG_ENDXFER. The application
// must NOT move on to the next image until it receives
// a TWRC_SUCCESS from the command. A custom return
// code of TWRC_BUSY will indicate that the Source
// is still waiting on the device. The application can
// end the session by issuing a MSG_STOPFEEDER command.
//
// Note that if CAP_AUTOSCAN is off then this situation
// can happen for any image related command that is
// issued: DAT_IMAGEINFO, DAT_IMAGELAYOUT,
// DAT_IMAGEFILEXFER, DAT_IMAGEMEMXFER, DAT_IMAGEFILEXFER.
//
// TWAIN 2.2 defines TWRC_BUSY. The driver assumes that
// the application's TWAIN protocol corresponds to the
// twain.h file that it was built with. Therefore, for
// applications that report a protocol of 2.1 or less
// the value of TWRC_BUSY will be 0x8001. For apps that
// report a value of 2.2 or higher the value returned
// will match whatever TWRC_BUSY is set to in the twain.h
// file. OBS_TWRC_BUSY is provided for situations where
// an app reports a value of 2.1 or less when it is using
// a 2.2 or greater twain.h. In this case the application
// must make a code change to use OBS_TWRC_BUSY.
//
// Applications must also allow for the protocol reported
// by the TWAIN driver. Drivers reporting 2.1 or less
// will only report a value of 0x8001 for TWRC_BUSY,
// regardless of the protocol reported by the application.
#define CAP_NOWAIT 0x8032
#define OBS_TWRC_BUSY 0x8001
#ifndef TWRC_BUSY
#define TWRC_BUSY 0x8001
#endif
// CAP_PAGECOUNT
// Family: A2O2, Alf, Alien, Blaze, Falcon, Fosters, Inferno,
// Mustang2, Panther, Phoenix, Piranha, Piranha2, Pony,
// Prism, Rufous, Wildfire, Viper
// Type: TWTY_FIX32
// Container: Range
// Allowed: 0 - 32767
// Default: 0
// Notes: Count of pages to transfer. This capability only
// takes effect if CAP_XFERCOUNT is -1. A value of 0
// disables this capability.
#define CAP_PAGECOUNT 0x8031
// CAP_PAGESIZELIMIT
// Family: A2O2, Alf, Alien, Blaze, Falcon, Fosters, Inferno,
// Mustang2, Panther, Phoenix, Piranha, Piranha2, Pony,
// Prism, Rufous, Wildfire, Viper
// Type: TWTY_FIX32
// Container: Range
// Allowed: 0 - ICAP_PHYSICALHEIGHT
// Default: 0
// Notes: Maximum allowed physical page height (in ICAP_UNITS).
// This is a double document detection feature.
#define CAP_PAGESIZELIMIT 0x8002
// CAP_PAPERSOURCE
// Family: A2O2, Alf, Alien, Blaze, Falcon, Fosters, Inferno,
// Mustang2, Panther, Phoenix, Piranha, Piranha2, Pony,
// Rufous, Wildfire
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: A2O2, Alien, Piranha, Piranha2 - TWPU_ADF. If platen installed
// TWPU_AUTO and TWPU_PLATEN also allowed.
// Alf, Fosters, Pony, Rufous - TWPU_ADF.
// Mustang2 - TWPU_ADF, TWPU_AUTO, TWPU_PLATEN
// Inferno/Panther/Phoenix/Wildfire - TWPU_ADF, TWPU_ELEVATOR100,
// TWPU_ELEVATOR250, TWPU_ELEVATOR500
// Blaze - TWPU_ADF, TWPU_ELEVATOR100, TWPU_ELEVATOR250,
// TWPU_ELEVATOR500, TWPU_ELEVATOR750
// Falcon (if only ADF) - TWPU_ADF, TWPU_ELEVATOR100, TWPU_ELEVATOR250
// Falcon (if Flatbed available) - add TWPU_AUTO, TWPU_PLATEN,
// TWPU_ELEVATOR100PLATEN, TWPU_ELEVATOR250PLATEN
// Default: Alf, Alien, Fosters, Pony, Rufous - TWPU_ADF
// Inferno/Panther/Phoenix/Wildfire - TWPU_ELEVATOR500
// Blaze - TWPU_ELEVATOR750
// A2O2, Mustang2, Piranha, Piranha2 - TWPU_AUTO
// Falcon (if only ADF) - TWPU_ELEVATOR250
// Falcon (if Flatbed available) - TWPU_ELEVATOR250PLATEN
// Notes: Selects source of paper (ADF or Platen). TWPU_AUTO
// selects ADF but changes to Platen if the ADF has no
// paper in it at the start of the scanning session.
#define CAP_PAPERSOURCE 0x802C
#define TWPU_AUTO 0
#define TWPU_ADF 1
#define TWPU_PLATEN 2
#define TWPU_ELEVATOR500 3
#define TWPU_ELEVATOR250 4
#define TWPU_ELEVATOR100 5
#define TWPU_ELEVATOR750 6
#define TWPU_ELEVATOR100PLATEN 7
#define TWPU_ELEVATOR250PLATEN 8
#define TWPU_ELEVATOR500PLATEN 9
// CAP_PATCHCOUNT
// Family: A2O2 (i1440), Alien(i280), Inferno, Panther, Phoenix,
// Wildfire
// Type: TWTY_INT32
// Container: OneValue
// Allowed: 0 - 32767
// Default: 0
// Notes: Count of patches per scan session
#define CAP_PATCHCOUNT 0x8087
// CAP_PATCHHEAD1
// Family: Wildfire
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: TRUE
// Notes: Enables/disables the first patch reader.
#define CAP_PATCHHEAD1 0x80BF
// CAP_PATCHHEAD2
// Family: Wildfire
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: TRUE
// Notes: Enables/disables the second patch reader.
#define CAP_PATCHHEAD2 0x80C0
// CAP_PATCHHEAD3
// Family: Wildfire
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: TRUE
// Notes: Enables/disables the third patch reader.
#define CAP_PATCHHEAD3 0x80C1
// CAP_PATCHHEAD4
// Family: Wildfire
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: TRUE
// Notes: Enables/disables the fourth patch reader.
#define CAP_PATCHHEAD4 0x80C2
// CAP_PCARDENABLED
// Family: n/a
// Type: TWTY_BOOL
// Container: OneValue (per camera)
// Allowed: TRUE / FALSE
// Default: TRUE
// Notes: Enables/disables the P-Card (note that this operates
// in tandem with the DAT_PCARD operation, setting this
// value here or there will modify both values).
// This capability is not available at this time.
#define CAP_PCARDENABLED 0x806A
// CAP_POWEROFFTIMEOUT
// Family: Falcon
// Type: TWTY_INT32
// Container: Range
// Allowed: Falcon: 0, 0 - 240 (minutes)
// Default: 60
// Notes: Minutes of idle time following CAP_ENERGYSTAR
// before device is powered off...
#define CAP_POWEROFFTIMEOUT 0x810C
// CAP_PRINTERDATE
// Family: Blaze, Falcon, Inferno, Panther, Phoenix, Wildfire
// Type: TWTY_STR255
// Container: OneValue
// Allowed: Text
// Default: ""
// Notes: This will set the scanner to a specific date prior to printing.
// The scanner will be returned to the original date afterwards.
// Set to "" to disable.
// Format: YYYY/MM/DD (YYYY - year, MM - month, DD - day)
#define CAP_PRINTERDATE 0x80BC
// CAP_PRINTERDATEDELIMITER
// Family: A2O2, Alien, Blaze, Falcon, Inferno, Panther, Phoenix, Prism,
// Wildfire, Viper (3520/4500)
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: (see list below)
// Default: Prism - TWPD_FORWARDSLASH
// Others - TWPD_NONE
// Notes: Selects the delimiter to be used in the date
// (not the time, though, time always uses a
// delimiter of colon ':').
#define CAP_PRINTERDATEDELIMITER 0x801C
#define TWPD_NONE 0
#define TWPD_FORWARDSLASH 1
#define TWPD_HYPHEN 2
#define TWPD_PERIOD 3
#define TWPD_BLANK 4
// CAP_PRINTERDATEFORMAT
// Family: A2O2, Blaze, Falcon, Inferno, Panther, Phoenix, Prism, Wildfire
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: A2O2/Phoenix/Prism - TWPE_MMDDYYYY, TWPE_DDMMYYYY, TWPE_YYYYMMDD
// Other - TWPE_MMDDYYYY, TWPE_DDMMYYYY, TWPE_YYYYMMDD, TWPE_DDD, TWPE_YYYYDDD
// Default: Prism - TWPE_MMDDYYYY
// Other - TWPE_YYYYMMDD
// Notes: Selects the format to be used to display
// the date (not the time, though).
#define CAP_PRINTERDATEFORMAT 0x8033
#define TWPE_MMDDYYYY 0
#define TWPE_DDMMYYYY 1
#define TWPE_YYYYMMDD 2
#define TWPE_DDD 3
#define TWPE_YYYYDDD 4
// CAP_PRINTERFONT
// Family: A2O2, Alien, Blaze, Falcon, Gemini, Inferno, Panther Phoenix,
// Prism, Wildfire, Viper (3520/4500)
// Type: TWTY_UINT16
// Allowed: A2O2/Alien/Gemini/Viper - TWPN_LARGECOMIC,TWPN_LARGECINE,TWPN_SMALLCOMIC,TWPN_SMALLCINE
// Inferno/Phoenix/Prism/Wildfire - TWPN_LARGECOMIC,TWPN_LARGECINE,TWPN_LARGECOMIC180,TWPN_LARGECINE180,
// TWPN_SMALLCOMIC,TWPN_SMALLCINE,TWPN_SMALLCOMIC180,TWPN_SMALLCINE180
// Blaze/Falcon - TWPN_LARGECOMIC,TWPN_LARGECINE,TWPN_LARGECOMIC180,TWPN_LARGECINE180,
// TWPN_SMALLCOMIC,TWPN_SMALLCINE,TWPN_SMALLCOMIC180,TWPN_SMALLCINE180,
// TWPN_BOLDLARGECOMIC,TWPN_BOLDLARGECINE,TWPN_BOLDLARGECOMIC180,TWPN_BOLDLARGECINE180
// Panther - TWPN_LARGECOMIC,TWPN_LARGECINE,TWPN_LARGECOMIC180,TWPN_LARGECINE180,
// TWPN_SMALLCOMIC,TWPN_SMALLCINE,TWPN_SMALLCOMIC180,TWPN_SMALLCINE180,
// TWPN_BOLDLARGECOMIC,TWPN_BOLDLARGECINE
// Default: Blaze, Falcon, Panther, Prism- TWPN_SMALLCOMIC
// Other- TWPN_LARGECOMIC
//
//
// Notes: elects the printer font to be used.
// Small also means 'Normal'; Large also means 'Bold'; BoldLarge also means 'ExtraBold'
#define CAP_PRINTERFONT 0x8044
#define TWPN_LARGECOMIC 0
#define TWPN_LARGECINE 1
#define TWPN_LARGECOMIC180 2
#define TWPN_LARGECINE180 3
#define TWPN_SMALLCOMIC 4
#define TWPN_SMALLCINE 5
#define TWPN_SMALLCOMIC180 6
#define TWPN_SMALLCINE180 7
#define TWPN_BOLDLARGECOMIC 8
#define TWPN_BOLDLARGECINE 9
#define TWPN_BOLDLARGECOMIC180 10
#define TWPN_BOLDLARGECINE180 11
#define TWPN_BOLDSMALLCOMIC 12
#define TWPN_BOLDSMALLCINE 13
#define TWPN_BOLDSMALLCOMIC180 14
#define TWPN_BOLDSMALLCINE180 15
// CAP_PRINTERFONTFORMAT
// Family: Wildfire
// Type: TWTY_UINT16
// Allowed: TWPFF_NORMAL, TWPFF_BLOCK
// Default: TWPFF_NORMAL
//
// Notes: elects the printer font format to be used
#define CAP_PRINTERFONTFORMAT 0x80BE
#define TWPFF_NORMAL 0
#define TWPFF_BLOCK 1
// CAP_PRINTERIMAGEADDRESSFORMAT
// Family: Gemini, Prism, Wildfire
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: (see list below)
// Default: Gemini-TWPI_DISPLAYLEADINGZEROS
// Prism-TWPI_SUPPRESSLEADINGZEROS
// Wildfire-TWPI_SUPPRESSLEADINGZEROS
// Notes: Selects the print format of leading zeros
// in the image address.
#define CAP_PRINTERIMAGEADDRESSFORMAT 0x8045
#define TWPI_DISPLAYLEADINGZEROS 0
#define TWPI_SUPPRESSLEADINGZEROS 1
#define TWPI_COMPRESSLEADINGZEROS 2
// CAP_PRINTERIMAGEADDRESSLEVEL
// Family: Gemini, Prism, Wildfire
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: Gemini-TWPL_LEVEL0, TWPL_LEVEL1, TWPL_LEVEL2,
// TWPL_LEVEL3, TWPL_ALLLEVELS
// Prism- TWPL_LEVEL1, TWPL_LEVEL2, TWPL_LEVEL3,
// TWPL_ALLLEVELS
// Wildfire-TWPL_LEVEL1, TWPL_LEVEL2, TWPL_LEVEL3,
// TWPL_ALLLEVELS
// Default: TWPL_ALLLEVELS
// Notes: Selects the image address level that printing
// will occur on. A value of TWPL_ALLLEVELS
// overrides any of the others.
#define CAP_PRINTERIMAGEADDRESSLEVEL 0x8047
#define TWPL_LEVEL0 0
#define TWPL_LEVEL1 1
#define TWPL_LEVEL2 2
#define TWPL_LEVEL3 3
#define TWPL_ALLLEVELS 4
#define TWPL_NONE 5
// CAP_PRINTERINDEXDIGITS
// Family: A2O2, Alien, Blaze, Falcon, Inferno, Panther, Phoenix,
// Prism, Wildfire, Viper (3520/4500)
// Type: TWTY_UINT16
// Container: Range
// Allowed: 1 - 9
// Default: 9
// Notes: Sets the number of digits of the counter to be
// printed. Note that the data will be truncated
// if the number of digits in the count exceeds
// this value.
#define CAP_PRINTERINDEXDIGITS 0x801B
// CAP_PRINTERINDEXFORMAT
// Family: A2O2, Alien, Blaze, Falcon, Inferno, Panther, Phoenix,
// Prism, Wildfire, Viper (3520/4500)
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: (see CAP_PRINTERIMAGEADDRESSFORMAT)
// Default: Prism-TWPI_SUPPRESSLEADINGZEROS
// Other-TWPI_DISPLAYLEADINGZEROS
// Notes: Selects the use of leading zeros or spaces when
// printing the counter value.
#define CAP_PRINTERINDEXFORMAT 0x801A
// CAP_PRINTERPOSITION
// Family A2O2, Alien, Blaze, Falcon, Gemini, Inferno, Panther, Phoenix,
// Prism, Wildfire, Viper (3520/4500)
// Type: TWTY_FIX32
// Container: Range
// Allowed: Scanner specific
// Default: Scanner specific
// Notes: Selects the printer position (y-offset, in ICAP_UNITS)
// to be used as the starting position for printing.
#define CAP_PRINTERPOSITION 0x8046
// CAP_PRINTERTIME
// Family: Inferno, Blaze, Falcon, Panther, Phoenix, Wildfire
// Type: TWTY_STR255
// Container: OneValue
// Allowed: Text
// Default: ""
// Notes: This will set the scanner to a specific time prior to printing.
// The scanner will be returned to the original time afterwards.
// Set to "" to disable.
// Format: HH:MM (HH - hour (0-23), MM - minutes (0-59),
// i.e. 00:00->23:59)
#define CAP_PRINTERTIME 0x80BD
// CAP_PRINTERWRITESEQUENCE
// Family: A2O2, Alien, Blaze, Falcon, Gemini(5000/7000), Inferno, Panther,
// Phoenix, Prism, Wildfire
// Type: TWTY_UINT16
// Allowed: All the stuff below (sheesh)...
// Notes: Selects the write sequence.
#define CAP_PRINTERWRITESEQUENCE 0x8049
#define TWPW_NONE 0
#define TWPW_FULLIAALLDELIMITERS 1
#define TWPW_FULLIANODELIMITERS 2
#define TWPW_FULLIAFIXEDDELIMITERS 3
#define TWPW_DELIMITER 4
#define TWPW_FIXEDIA 5
#define TWPW_INDEXIA 6
#define TWPW_CURRENTLEVELIA 7
#define TWPW_DATE 8
#define TWPW_DAY 9
#define TWPW_TIME 10
#define TWPW_DOCUMENTCOUNT 11
#define TWPW_MESSAGE1 12
#define TWPW_MESSAGE2 13
#define TWPW_MESSAGE3 14
#define TWPW_MESSAGE4 15
#define TWPW_MESSAGE5 16
#define TWPW_MESSAGE6 17
#define TWPW_MESSAGE7 18
#define TWPW_MESSAGE8 19
#define TWPW_MESSAGE9 20
#define TWPW_SPACE 21
#define TWPW_TEXT 22
#define TWPW_INDEX 23
#define TWPW_MMDDYYYY 24
#define TWPW_DDMMYYYY 25
#define TWPW_YYYYMMDD 26
#define TWPW_IMAGEADDRESS_A 27
#define TWPW_IMAGEADDRESS_B 28
#define TWPW_IMAGEADDRESS_C 29
#define TWPW_IMAGEADDRESS_D 30
// CAP_PRINTERWRITESEQUENCEINDEX
// Family: Gemini (5000/7000)
// Type: TWTY_UINT16
// Allowed: 1 - 7
// Notes: Selects the write sequence index.
#define CAP_PRINTERWRITESEQUENCEINDEX 0x8048
// CAP_PRINTERWRITESEQUENCEMESSAGE1 - 12
// Family: A2O2, Blaze, Falcon, Gemini, Inferno, Panther, Phoenix,
// Prism, Wildfire, Viper (3520/4500)
// Type: TWTY_STR255
// Container: OneValue
// Allowed: A2O2/Falcon/Panther only has one message
// Prism/Phoenix/Wildfire/Inferno: 1 to 6
// Default: A2O2- ABC
// Gemini-#1
// Viper- ABC
// Prism- (empty string)
// Inferno/Phoenix- ABC
// Blaze/Falcon/Panther/Wildfire- 111
// Notes: 5000/7000 only...selects the write sequence
// messages (1 - 9). Prism only...selects the
// write sequence messages 1-6 if the levels
// are independent and 7-12 for 'all' levels.
#define CAP_PRINTERWRITESEQUENCEMESSAGE1 0x800C
#define CAP_PRINTERWRITESEQUENCEMESSAGE2 0x800D
#define CAP_PRINTERWRITESEQUENCEMESSAGE3 0x800E
#define CAP_PRINTERWRITESEQUENCEMESSAGE4 0x800F
#define CAP_PRINTERWRITESEQUENCEMESSAGE5 0x8010
#define CAP_PRINTERWRITESEQUENCEMESSAGE6 0x8011
#define CAP_PRINTERWRITESEQUENCEMESSAGE7 0x8012
#define CAP_PRINTERWRITESEQUENCEMESSAGE8 0x8013
#define CAP_PRINTERWRITESEQUENCEMESSAGE9 0x8014
#define CAP_PRINTERWRITESEQUENCEMESSAGE10 0x8034
#define CAP_PRINTERWRITESEQUENCEMESSAGE11 0x8035
#define CAP_PRINTERWRITESEQUENCEMESSAGE12 0x8036
// CAP_PRINTERWRITESEQUENCEMESSAGEINDEX
// Family: A2O2, Alien, Inferno, Phoenix, Wildfire
// Type: TWTY_UINT16
// Container: OneValue
// Allowed: Inferno/Phoenix/Wildfire 1 - 6
// A2O2, Alien 1
// Default: 1
// Notes: Selects the write sequence messages.
#define CAP_PRINTERWRITESEQUENCEMESSAGEINDEX 0x808A
// CAP_PRINTERWRITESEQUENCESPACE
// Family: Gemini(5000/7000)
// Type: TWTY_UINT16
// Allowed: Number of blanks...
// Notes: 5000/7000 only. Blank count for the write sequence.
#define CAP_PRINTERWRITESEQUENCESPACE 0x800A
// CAP_PRINTERWRITESEQUENCESPACESTRING
// Family: Gemini(5000/7000)
// Type: TWTY_STR255
// Allowed: The WriteSequenceSpace string...
// Notes: 5000/7000 only. Selects the write sequence
// count of spaces.
#define CAP_PRINTERWRITESEQUENCESPACESTRING 0x800B
// CAP_PRINTERWRITESEQUENCESTRING
// Family: A2O2, Alien, Blaze, Falcon, Gemini (5000/7000), Inferno,
// Panther, Phoenix, Prism, Wildfire
// Type: TWTY_STR255
// Allowed: The WriteSequence string...
// Notes: 5000/7000 only. Selects the write sequence.
#define CAP_PRINTERWRITESEQUENCESTRING 0x8009
// CAP_PROFILES
// Family: A2O2, Blaze, Falcon, Fosters, Inferno, Panther, Phoenix, Piranha,
// Piranha2, Rufous, Wildfire
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: (see list below)
// Default: TWPO_DEFAULT
// Notes: THIS IS DEPRECATED TWAIN 10.X+. DAT_PROFILES SHOULD BE USED INSTEAD.
// Selects the current profile. This set the current settings from
// the selected profile to the driver.
// Or see the CUSTOMDSDATA that works the same as profile.
// See the MSG_SETUPDS on how to download the settings to the scanner
// without enable the scanning session.
// Also refer to DAT_PROFILES later in this file.
#define CAP_PROFILES 0x809F
#define TWPO_UNKNOWN -1
#define TWPO_DEFAULT 0
#define TWPO_FILE01 1
#define TWPO_FILE02 2
#define TWPO_FILE03 3
#define TWPO_FILE04 4
#define TWPO_FILE05 5
#define TWPO_FILE06 6
#define TWPO_FILE07 7
#define TWPO_FILE08 8
#define TWPO_FILE09 9
#define TWPO_FILE10 10
#define TWPO_FILE11 11
#define TWPO_FILE12 12
#define TWPO_FILE13 13
#define TWPO_FILE14 14
#define TWPO_FILE15 15
#define TWPO_FILE16 16
#define TWPO_FILE17 17
#define TWPO_FILE18 18
#define TWPO_FILE19 19
#define TWPO_FILE20 20
#define TWPO_FILE21 21
#define TWPO_FILE22 22
#define TWPO_FILE23 23
#define TWPO_FILE24 24
#define TWPO_FILE25 25
#define TWPO_FILE26 26
#define TWPO_FILE27 27
#define TWPO_FILE28 28
#define TWPO_FILE29 29
#define TWPO_FILE30 30
#define TWPO_FILE31 31
#define TWPO_FILE32 32
#define TWPO_FILE33 33
#define TWPO_FILE34 34
#define TWPO_FILE35 35
#define TWPO_FILE36 36
#define TWPO_FILE37 37
#define TWPO_FILE38 38
#define TWPO_FILE39 39
#define TWPO_FILE40 40
#define TWPO_FILE41 41
#define TWPO_FILE42 42
#define TWPO_FILE43 43
#define TWPO_FILE44 44
#define TWPO_FILE45 45
#define TWPO_FILE46 46
#define TWPO_FILE47 47
#define TWPO_FILE48 48
#define TWPO_FILE49 49
#define TWPO_FILE50 50
#define TWPO_FILE51 51
#define TWPO_FILE52 52
#define TWPO_FILE53 53
#define TWPO_FILE54 54
#define TWPO_FILE55 55
#define TWPO_FILE56 56
#define TWPO_FILE57 57
#define TWPO_FILE58 58
#define TWPO_FILE59 59
#define TWPO_FILE60 60
// CAP_SIDESDIFFERENT
// Family: A2O2, Blaze, Falcon, Fosters, Inferno, Panther, Phoenix, Piranha,
// Piranha2, Rufous, Wildfire
// Type: TWTY_BOOL
// Container: OneValue (per camera)
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: When this is TRUE the user can set different values for the
// front and rear camera.
// Setting this to FALSE will copy all the front settings to the
// rear for the current camera.
// This will automatically change to TRUE when the front and
// rear no longer match. Note: a value of TRUE does NOT imply
// that the sides are different (e.g. if everything matches and
// this is set to TRUE)
#define CAP_CAMERALINK 0x80B7 // deprecated after v7.55
#define CAP_SIDESDIFFERENT 0x80B7 // available since v7.56
// CAP_SIMULATING
// Family: Blaze, Falcon, Panther, Piranha2
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Simulate the scanner.
#define CAP_SIMULATING 0x810B
// CAP_SUPPORTEDSIZES
// Family: A2O2, Alf, Alien, Blaze, Falcon, Fosters, Gemini, Inferno,
// Mustang2, Panther, Phoenix, Piranha, Piranha2, Pony, Prism,
// Rufous, Wildfire, Viper
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: (see list below)
// Default: TWSS_A4
// Notes: This list adds custom values to this standard TWAIN
// capability. The TWSS_USER* values may be set up by
// an end-user through the CONST.INI and appropriate
// language file(s) to add custom sizes to the existing
// list. See the CONST.INI file under the section
// [SupportedSizes] for more info on how to do this.
#define TWSS_6X5 0x8001
#define TWSS_12X12 0x8002
#define TWSS_3X5 0x8003 // 3.5 x 5
#define TWSS_4X6 0x8004
#define TWSS_5X7 0x8005
#define TWSS_8X10 0x8006
#define TWSS_4X7 0x8007
#define TWSS_4X10 0x8008
#define TWSS_100X150 0x8009
#define TWSS_127X177 0x8010
#define TWSS_90X130 0x8011
#define TWSS_57X88 0x8012 // 57.17 x 88.9
#define TWSS_5X3 0x8013 // 3.5 x 5
#define TWSS_6X4 0x8014
#define TWSS_7X5 0x8015
#define TWSS_7X4 0x8016
#define TWSS_150X100 0x8017
#define TWSS_177X127 0x8018
#define TWSS_130X90 0x8019
#define TWSS_88X57 0x8020 // 57.17 x 88.9
#define TWSS_USER0 0x8100
#define TWSS_USER1 0x8101
#define TWSS_USER2 0x8102
#define TWSS_USER3 0x8103
#define TWSS_USER4 0x8104
#define TWSS_USER5 0x8105
#define TWSS_USER6 0x8106
#define TWSS_USER7 0x8107
#define TWSS_USER8 0x8108
#define TWSS_USER9 0x8109
// CAP_TOGGLEPATCH
// Family: A2O2 (i1440), Alien (i280), Blaze, Falcon (i3000), Inferno,
// Panther, Phoenix, Prism, Wildfire
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: (see list below)
// Default: TWTP_DISABLED
// Notes: Controls recognition of the color patch.
#define CAP_TOGGLEPATCH 0x806D
#define TWTP_DISABLED 0
#define TWTP_BOTHSIDE 1
#define TWTP_FRONTSIDE 2
#define TWTP_SAMESIDE 4
#define TWTP_DETECTONLY 7
// CAP_TRANSPORTAUTOSTART
// Family: A2O2, Fosters, Blaze, Inferno, Panther, Phoenix,
// Piranha, Piranha2, Prism, Rufous, Wildfire
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: A2O2, Fosters, Piranha, Piranha2, Rufous: TRUE (readonly)
// Other: TRUE / FALSE
// Default: A2O2, Blaze, Fosters, Panther, Piranha, Piranha2, Rufous: TRUE
// Other: FALSE
// Notes: A value of TRUE will cause the scanner transport to
// start up when the MSG_ENABLEDS command is issued.
#define CAP_TRANSPORTAUTOSTART 0x8029
// CAP_TRANSPORTTIMEOUT
// Family: A2O2, Alf, Alien, Blaze, Falcon, Fosters, Inferno,
// Mustang2, Panther,Phoenix, Piranha, Piranha2, Pony,
// Prism, Rufous, Wildfire, Viper
// Type: TWTY_INT32
// Container: Range
// Allowed: Alf/Alien: 3-30
// Mustang2/Pony: 1-30
// A2O2/Fosters/Inferno/Phoenix/Piranha/Wildfire: 0,1-300
// Prism: 0,5-300
// Viper: 3-30
// Blaze/Panther/Piranha2/Rufous: 0, 1-120
// Default: A2O2/Alf/Alien: 8
// Fosters/Mustang2/Piranha/Pony: 1
// Inferno/Phoenix/Wildfire: 15
// Blaze/Panther: 5
// Prism: 10
// Viper: 8
// Piranha2/Rufous: 0
// Notes: Number of seconds before transport times out.
#define CAP_TRANSPORTTIMEOUT 0x8003
// CAP_TRANSPORTTIMEOUTRESPONSE
// Family: A2O2, Fosters, Blaze, Falcon, Inferno, Panther, Phoenix,
// Piranha, Piranha2, Prism, Rufous, Wildfire
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: A2O2, Fosters, Piranha, Piranha2, Rufous: TWTR_ENDOFJOB
// Other: See below
// Default: A2O2,Falcon,Fosters,Panther,Piranha,Piranha2,Rufous: TWTR_ENDOFJOB
// Other: TWTR_STOPFEEDER
// Notes: Selects action taken when the transport times out.
// If the transport timeout is disabled, then this
// capability is ignored.
#define CAP_TRANSPORTTIMEOUTRESPONSE 0x8028
#define TWTR_STOPFEEDER 0
#define TWTR_ENDOFJOB 1
// CAP_ULTRASONICSENSITIVITY
// Family: A2O2, Alf, Alien, Blaze, Falcon, Inferno, Panther, Phoenix,
// Piranha, Piranha2, Prism, Wildfire
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: See below...
// Default: TWUS_DISABLED
// Notes: Controls the sensitivity of the ultrasonic multifeed
// detector.
//
// Please note that there is a conflict with version 2.2 of the
// TWAIN Spec. Previous versions of kds_cust.h defined TWUS_*
// values. This behavior is still supported if used with
// a TWAIN 2.1 twain.h or earlier.
//
// Applications must change to use TWUSS_* with CAP_ULTRASONICSENSITIVITY,
// this will work with any version of the driver.
//
// Only use TWUS_* with the standard CAP_DOUBLEFEEDDETECTIONSENSITIVITY
// capability.
#define CAP_ULTRASONICSENSITIVITY 0x8027
#ifndef CAP_DOUBLEFEEDDETECTIONSENSITIVITY
#define TWUS_DISABLED 0
#define TWUS_LOW 1
#define TWUS_MEDIUM 2
#define TWUS_HIGH 3
#endif
#define TWUSS_DISABLED 0
#define TWUSS_LOW 1
#define TWUSS_MEDIUM 2
#define TWUSS_HIGH 3
// CAP_ULTRASONICSENSOR*
// Family: Blaze, Inferno, Panther, Phoenix, Wildfire
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: See below...
// Default: TWUO_ENABLED
// Notes: Controls the individual ultrasonic sensor
// detector.
#define CAP_ULTRASONICSENSORCENTER 0x808F
#define CAP_ULTRASONICSENSORLEFT 0x8090
#define CAP_ULTRASONICSENSORRIGHT 0x8091
#define CAP_ULTRASONICSENSORLEFTCENTER 0x8105
#define CAP_ULTRASONICSENSORRIGHTCENTER 0x8106
#define TWUO_DISABLED 0
#define TWUO_ENABLED 1
#define TWUO_IGNOREZONE 2
// CAP_ULTRASONICSENSORZONEHEIGHT
// Family: Blaze
// Type: TWTY_FIX32
// Container: Range
// Allowed: Scanner specific
// Default: Scanner specific
// Notes: Height of zone for the CAP_ULTRASONICSENSOR* that
// are set to TWUO_IGNOREZONE
#define CAP_ULTRASONICSENSORZONEHEIGHT 0x8107
// CAP_WINDOW
// Family: A2O2, Blaze, Falcon, Fosters, Inferno, Panther, Phoenix,
// Piranha, Piranha2, Rufous, Wildfire
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: See below..
// Default: TWWW_BASE
// Notes: Deprecated, use CAP_WINDOWCAMERA or DAT_FILESYSTEM.
#define CAP_WINDOW 0x80AD
#define TWWW_BASE 0
#define TWWW_1 1
#define TWWW_2 2
#define TWWW_3 3
#define TWWW_4 4
#define TWWW_5 5
#define TWWW_6 6
#define TWWW_7 7
#define TWWW_8 8
#define TWWW_9 9
#define TWWW_10 10
// CAP_WINDOWCAMERA
// Family: A2O2, Blaze, Falcon, Fosters, Inferno, Panther, Phoenix,
// Piranha, Piranha2, Rufous, Wildfire
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: See below..
// Default: TWWC_BASE_BITONAL_FRONT
// Notes: Allows for direct addressing of windows. Does not
// change CAP_SIDESDIFFERENT like DAT_FILESYSTEM.
#define CAP_WINDOWCAMERA 0x80B4
#define TWWC_DELETEALL -1
#define TWWC_BASE_BITONAL_FRONT 0
#define TWWC_BASE_BITONAL_REAR 1
#define TWWC_BASE_COLOR_FRONT 2
#define TWWC_BASE_COLOR_REAR 3
#define TWWC_1_BITONAL_FRONT 4
#define TWWC_1_BITONAL_REAR 5
#define TWWC_1_COLOR_FRONT 6
#define TWWC_1_COLOR_REAR 7
#define TWWC_2_BITONAL_FRONT 8
#define TWWC_2_BITONAL_REAR 9
#define TWWC_2_COLOR_FRONT 10
#define TWWC_2_COLOR_REAR 11
#define TWWC_3_BITONAL_FRONT 12
#define TWWC_3_BITONAL_REAR 13
#define TWWC_3_COLOR_FRONT 14
#define TWWC_3_COLOR_REAR 15
#define TWWC_4_BITONAL_FRONT 16
#define TWWC_4_BITONAL_REAR 17
#define TWWC_4_COLOR_FRONT 18
#define TWWC_4_COLOR_REAR 19
#define TWWC_5_BITONAL_FRONT 20
#define TWWC_5_BITONAL_REAR 21
#define TWWC_5_COLOR_FRONT 22
#define TWWC_5_COLOR_REAR 23
#define TWWC_6_BITONAL_FRONT 24
#define TWWC_6_BITONAL_REAR 25
#define TWWC_6_COLOR_FRONT 26
#define TWWC_6_COLOR_REAR 27
#define TWWC_7_BITONAL_FRONT 28
#define TWWC_7_BITONAL_REAR 29
#define TWWC_7_COLOR_FRONT 30
#define TWWC_7_COLOR_REAR 31
#define TWWC_8_BITONAL_FRONT 32
#define TWWC_8_BITONAL_REAR 33
#define TWWC_8_COLOR_FRONT 34
#define TWWC_8_COLOR_REAR 35
#define TWWC_9_BITONAL_FRONT 36
#define TWWC_9_BITONAL_REAR 37
#define TWWC_9_COLOR_FRONT 38
#define TWWC_9_COLOR_REAR 39
#define TWWC_10_BITONAL_FRONT 40
#define TWWC_10_BITONAL_REAR 41
#define TWWC_10_COLOR_FRONT 42
#define TWWC_10_COLOR_REAR 43
// CAP_WINDOWPOSITION
// Family: A2O2, Alf, Alien, Fosters, Gemini, Inferno, Mustang2,
// Phoenix, Piranha, Pony, Prism, Wildfire, Viper
// Type: TWTY_FRAME
// Container: OneValue
// Allowed: Anything
// Default: 0,0 (top left of screen)
// Notes: Left and Top position of dialog (Width and Height are
// ignored). Use this to select the location of the
// Source's GUI when it is displayed to the user.
#define CAP_WINDOWPOSITION 0x8004
////////////////////////////////////////////////////////////////////////////////
// ICAP Section
////////////////////////////////////////////////////////////////////////////////
// ICAP_ADDBORDER
// Family: A2O2, Blaze, Falcon, Fosters, Inferno, Panther, Phoenix,
// Piranha, Piranha2, Prism, Rufous, Wildfire
// Type: TWTY_BOOL
// Container: OneValue (per camera)
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Adds a black border around a bitonal document.
#define ICAP_ADDBORDER 0x8023
#define ICAP_ANSELBRIGHTNESS 0x80A0
#define ICAP_ANSELCONTRAST 0x80A1
#define ICAP_ANSELHIGHLIGHT 0x80A2
#define ICAP_ANSELMIDTONE 0x80A3
// ICAP_ANSELREMOVEREDEYE
// Family: Oasis
// Type: TWTY_BOOL
// Container: OneValue (per camera)
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Controls red-eye removal.
#define ICAP_ANSELREMOVEREDEYE 0x80A4
// ICAP_ANSELRESTORECOLOR
// Family: Oasis
// Type: TWTY_BOOL
// Container: OneValue (per camera)
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Adds a black border around a bitonal document.
#define ICAP_ANSELRESTORECOLOR 0x80A5
#define ICAP_ANSELSATURATECOLORS 0x80A6
#define ICAP_ANSELSHADOW 0x80A7
// ICAP_ANSELSHARPENIMAGE
// Family: Oasis
// Type: TWTY_UINT16
// Container: Enumeration (per camera)
// Allowed: (see below)
// Default: TWASP_DISABLE
// Notes: Controls picture sharpening.
#define ICAP_ANSELSHARPENIMAGE 0x80A8
#define TWASP_DISABLE 0
#define TWASP_NORMAL 1
#define TWASP_HIGH 2
#define TWASP_EXAGGERATED 3
// ICAP_ANSELSHASTA
// Family: Oasis
// Type: TWTY_UINT16
// Container: Enumeration (per camera)
// Allowed: (see below)
// Default: TWASH_DISABLE
// Notes: TBD
#define ICAP_ANSELSHASTA 0x80A9
#define TWASH_DISABLE 0
#define TWASH_AUTO 1
#define TWASH_MANUAL 2
// ICAP_AUTOCOLORAMOUNT
// Family: A2O2, Blaze, Falcon, Inferno, Panther, Phoenix, Piranha,
// Piranha2, Wildfire
// Type: TWTY_INT32
// Container: Range (per camera)
// Allowed: 1 to 200
// Default: 1
// Notes: The amount of color that needs to be present in a document
// before it will be saved as either a color or grayscale image.
#define ICAP_AUTOCOLORAMOUNT 0x8092
// ICAP_AUTOCOLORCONTENT
// Family: A2O2, Blaze, Falcon, Inferno, Panther, Phoenix, Piranha,
// Piranha2, Wildfire
// Type: TWTY_UINT16
// Container: Enumeration (per camera)
// Allowed: TWCL_NONE,TWCL_LOW,TWCL_MEDIUM,TWCL_HIGH,TWCL_CUSTOM
// Default: TWCL_NONE
// Notes: Preset values for AUTOCOLORAMOUNT and AUTOCOLORTHRESHOLD.
// NONE turns autocolor detection off.
// CUSTOM allows amount and threshold to be set.
// When this is not NONE, CAMERAENABLE has no effect on output
// color (rgb/gray/bw). Rather, CAMERAENABLE dictates which
// sides should be scanned (front/rear).
// Enabling both color and bitonal for a side indicates both are
// desired as output, and therefore AUTOCOLORCONTENT will be set
// to TWCL_NONE.
// If both color and bitonal are enabled on a side when
// AUTOCOLORCONTENT is turned on, CAMERAENABLED will be set to
// FALSE for the bitonal camera on that side.
#define ICAP_AUTOCOLORCONTENT 0x8093
#define TWCL_NONE 0
#define TWCL_LOW 1
#define TWCL_MEDIUM 2
#define TWCL_HIGH 3
#define TWCL_CUSTOM 4
// ICAP_AUTOCOLORTHRESHOLD
// Family: A2O2, Blaze, Falcon, Inferno, Panther, Phoenix, Piranha,
// Piranha2, Wildfire
// Type: TWTY_INT32
// Container: Range (per camera)
// Allowed: 0 to 100
// Default: Falcon, Panther, Piranha2: 20
// Other: 50
// Notes: The color threshold or intensity (i.e. pale blue vs. dark blue)
// at which a given a color will be included in the Color Amount
// calculation . A higher value indicates that a more intense color
// is required.
#define ICAP_AUTOCOLORTHRESHOLD 0x8094
// ICAP_BACKGROUNDADJUSTAGGRESSIVENESS
// Family: A2O2, Blaze, Falcon, Panther, Piranha, Piranha2
// Type: TWTY_INT32
// Container: Range (per color camera)
// Allowed: -10 to 10
// Default: 0
// Notes: The background color adjustment aggressiveness
#define ICAP_BACKGROUNDADJUSTAGGRESSIVENESS 0x80B0
// ICAP_BACKGROUNDADJUSTAPPLYTO
// Family: A2O2, Blaze, Falcon, Panther, Piranha, Piranha2
// Type: TWTY_UINT16
// Container: Enumeration (per color camera)
// Allowed: TWBA_ALL,TWBA_NEUTRAL,TWBA_PREDOMINATE
// Default: TWBA_PREDOMINATE
// Notes: The background color adjustment apply to
#define ICAP_BACKGROUNDADJUSTAPPLYTO 0x80AF
#define TWBA_ALL 0
#define TWBA_NEUTRAL 1
#define TWBA_PREDOMINATE 2
// ICAP_BACKGROUNDADJUSTMODE
// Family: A2O2, Blaze, Falcon, Panther, Piranha, Piranha2
// Type: TWTY_UINT16
// Container: Enumeration (per color camera)
// Allowed: TWBS_NONE,TWBS_AUTO,TWBS_CHANGETOWHITE, TWBS_AUTOMATICBASIC
// Default: TWCL_NONE
// Notes: The background smoothing mode
#define ICAP_BACKGROUNDADJUSTMODE 0x80AE
#define TWBS_NONE 0
#define TWBS_AUTOMATIC 1
#define TWBS_CHANGETOWHITE 2
#define TWBS_AUTOMATICBASIC 3
// ICAP_COLORBALANCEAUTOMATICAGGRESSIVENESS
// Family: Falcon, Piranha2, Rufous
// Type: TWTY_INT32
// Container: Range (per color camera)
// Allowed: -2 to 2
// Default: 0
// Notes: Indicates how aggressive the automatic white balance will be.
// This is only available when ICAP_COLORBALANCEMODE set to
// TWCBM_AUTOMATICADVANCED
#define ICAP_COLORBALANCEAUTOMATICAGGRESSIVENESS 0x810A
// ICAP_COLORBALANCEMODE
// Family: Blaze, Falcon, Piranha2, Rufous
// Type: TWTY_UINT16
// Container: Enumeration (per color camera)
// Allowed: Blaze: TWCBM_NONE, TWCBM_MANUAL
// Others: TWCBM_NONE, TWCBM_MANUAL, TWCBM_AUTOMATIC,
// TWCBM_AUTOMATICBASIC
// Default: Blaze: TWCBM_NONE
// Others: TWCBM_AUTOMATICBASIC
// Notes: Allows the user to select the method for adjusting the color
// balance of a color image.
// TWCBM_NONE means no adjustment is made.
// TWCBM_MANUAL means the user can adjust Red, Green and Blue
// (see ICAP_COLORBALANCEREAD/GREEN/BLUE).
// TWCBM_AUTOMATICBASIC means the scanner will automatically
// adjust the balance to be white.
// TWCBM_AUTOMATIC is the same as TWCBM_AUTOMATICBASIC but
// the user can also adjust the aggressiveness of the balance
// (see ICAP_COLORBALANCEAUTOMATICAGRESSIVENESS).
#define ICAP_COLORBALANCEMODE 0x8109
#define TWCBM_NONE 0
#define TWCBM_MANUAL 1
#define TWCBM_AUTOMATICBASIC 2
#define TWCBM_AUTOMATIC 3
// ICAP_COLORBALANCEBLUE
// ICAP_COLORBALANCEGREEN
// ICAP_COLORBALANCERED
// Family: A2O2, Blaze, Falcon, Fosters, Panther, Piranha, Piranha2, Rufous
// Type: TWTY_INT32
// Container: Range (per camera)
// Allowed: -50 to 50 step 1 for the GUI
// -1000 to 1000 step 20 for programmatic
// Default: 0
// Notes: Allow the user to adjust the color balance. This is ignored
// if ICAP_COLORBALANCEMODE is not set to TWCBM_MANUAL.
#define ICAP_COLORBALANCEBLUE 0x80B1
#define ICAP_COLORBALANCEGREEN 0x80B2
#define ICAP_COLORBALANCERED 0x80B3
// CAP_COLORBRIGHTNESSMODE
// Family: Blaze, Falcon, Piranha2
// Type: TWTY_UINT16
// Container: Enumeration (per color camera)
// Allowed: Blaze: TWCBR_NONE, TWCBR_MANUAL
// Others: TWCBR_NONE, TWCBR_MANUAL, TWCBR_AUTOMATIC
// Default: Blaze: TWCBR_NONE
// Others: TWCBR_AUTOMATIC
// Notes: Allows the user to select the method for adjusting the
// brightness and contrast of a color or grayscale image.
// TWCBR_NONE means no adjustment is made.
// TWCBR_MANUAL means the user can adjust Brightness and
// Contrast (see ICAP_BRIGHTNESS and ICAP_CONTRAST).
// TWCBR_AUTOMATICBASIC means the scanner will
// automatically adjust the image.
#define ICAP_COLORBRIGHTNESSMODE 0x8108
#define TWCBR_NONE 0
#define TWCBR_MANUAL 1
#define TWCBR_AUTOMATICBASIC 2
// ICAP_COLORSHARPEN
// Family: Blaze, Falcon, Panther, Piranha2, Rufous
// Type: TWTY_UINT32
// Container: Range (per output stream)
// Allowed: 0 - 3
// Default: 1
// Notes: Apply sharpening to image - 0 indicates no sharpening.
// 1 is normal, 2 is more sharpening, and a value of 3
// applies a lot of sharpening.
#define ICAP_COLORSHARPEN 0x8102
// ICAP_COLORSHARPENING
// Family: Prism, Wildfire, Viper
// Type: TWTY_INT16
// Container: Enumeration (per camera)
// Allowed: TWCS_NONE, TWCS_3X3FIRFILTER
// Default: TWCS_3X3FIRFILTER
// Notes: Color image sharpening. This setting only has
// meaning if ICAP_COMPRESSION is set to TWCP_JPEG.
#define ICAP_COLORSHARPENING 0x8041
#define TWCS_NONE 0
#define TWCS_3X3FIRFILTER 1
// ICAP_COLORTABLE
// Family: A2O2, Alf, Alien, Fosters, Inferno, Mustang2, Phoenix,
// Piranha, Pony, Prism, Wildfire, Viper
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: (see list below)
// Default: (as discovered in scanner)
// Notes: Selects the color table to use. This capability
// is like ICAP_HALFTONES in that there is no
// programmatic way to guarantee the results of a
// given selection. The best tactic is to present
// the data to the user 'as is' and let them select
// what they want.
#define ICAP_COLORTABLE 0x8020
#define TWCT_UNKNOWN -1
#define TWCT_DEFAULT 0
#define TWCT_FILE01 1
#define TWCT_FILE02 2
#define TWCT_FILE03 3
#define TWCT_FILE04 4
#define TWCT_FILE05 5
#define TWCT_FILE06 6
#define TWCT_FILE07 7
#define TWCT_FILE08 8
#define TWCT_FILE09 9
#define TWCT_FILE10 10
#define TWCT_FILE11 11
#define TWCT_FILE12 12
#define TWCT_FILE13 13
#define TWCT_FILE14 14
#define TWCT_FILE15 15
#define TWCT_FILE16 16
#define TWCT_FILE17 17
#define TWCT_FILE18 18
#define TWCT_FILE19 19
#define TWCT_FILE20 20
#define TWCT_FILE21 21
#define TWCT_FILE22 22
#define TWCT_FILE23 23
#define TWCT_FILE24 24
#define TWCT_FILE25 25
#define TWCT_FILE26 26
#define TWCT_FILE27 27
#define TWCT_FILE28 28
#define TWCT_FILE29 29
#define TWCT_FILE30 30
#define TWCT_FILE31 31
#define TWCT_FILE32 32
#define TWCT_FILE33 33
#define TWCT_FILE34 34
#define TWCT_FILE35 35
#define TWCT_FILE36 36
#define TWCT_FILE37 37
#define TWCT_FILE38 38
#define TWCT_FILE39 39
#define TWCT_FILE40 40
#define TWCT_FILE41 41
#define TWCT_FILE42 42
#define TWCT_FILE43 43
#define TWCT_FILE44 44
#define TWCT_FILE45 45
#define TWCT_FILE46 46
#define TWCT_FILE47 47
#define TWCT_FILE48 48
#define TWCT_FILE49 49
#define TWCT_FILE50 50
#define TWCT_FILE51 51
#define TWCT_FILE52 52
#define TWCT_FILE53 53
#define TWCT_FILE54 54
#define TWCT_FILE55 55
#define TWCT_FILE56 56
#define TWCT_FILE57 57
#define TWCT_FILE58 58
#define TWCT_FILE59 59
#define TWCT_FILE60 60
// ICAP_CROPPINGMODE
// Family: A2O2, Alf, Alien, Blaze, Falcon, Fosters, Inferno,
// Mustang2, Panther, Phoenix, Piranha, Piranha2, Pony,
// Prism, Rufous, Wildfire
// Type: TWTY_UINT16
// Container: Enumeration (per camera)
// Allowed: See below...
// Default: TWCR_AUTOMATICBORDERDETECTION
// Notes: Selects the mode of cropping. This capability is
// tied to ICAP_AUTOMATICBORDERDETECTION, where FALSE
// equals TWCR_TRANSPORT and TRUE equals
// TWCR_AUTOMATICBORDERDETECTION.
// Continuous cropping mode is also known as Long Paper mode.
// If the user set one of the camera to TWCR_CONTIUOUS
// all the camera force to set cropping to TWCR_CONTIUOUS
// and if all camera in TWCR_CONTIUOUS cropping mode, the
// user change one of the camera to other cropping mode
// then all the camera will force to set the same cropping mode
#define ICAP_CROPPINGMODE 0x8022
#define TWCR_AUTOMATICBORDERDETECTION 0
#define TWCR_TRANSPORT 1
#define TWCR_DOCUMENT 2
#define TWCR_AGGRESSIVEAUTOCROP 3
#define TWCR_CONTINUOUS 4
#define TWCR_MULTIPLEAGGRESSIVE 5
#define TWCR_PHOTO 6
#define TWCR_PHOTOINROI 7
// ICAP_DOCUMENTTYPE
// Family: A2O2, Blaze, Falcon, Fosters, Oasis, Panther, Piranha, Piranha2, Rufous
// Type: TWTY_UINT16
// Container: Enumeration (per camera)
// Allowed: See below
// Default: TWDT_TEXTWITHGRAPHIC
// Oasis: TWDT_PHOTO
// Notes: Allows user to select the type of document being scanned.
#define ICAP_DOCUMENTTYPE 0x80AC
#define TWDT_PHOTO 0
#define TWDT_TEXTWITHGRAPHICS 1
#define TWDT_TEXTWITHPHOTO 2
#define TWDT_TEXT 3
// ICAP_ECDO
// Family: A2O2, Blaze, Falcon, Fosters, Panther, Piranha, Piranha2, Rufous
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: (see list below)
// Default: None
// Notes: Allows user to select the ECDO color for bitonal/gray camera.
// Also refer to DAT_ECDO later in this file.
#define ICAP_ECDO 0x80B8
#define TWCD_UNKNOWN -1
#define TWCD_NONE 0
#define TWCD_FILE01 1
#define TWCD_FILE02 2
#define TWCD_FILE03 3
#define TWCD_FILE04 4
#define TWCD_FILE05 5
#define TWCD_FILE06 6
#define TWCD_FILE07 7
#define TWCD_FILE08 8
#define TWCD_FILE09 9
#define TWCD_FILE10 10
#define TWCD_FILE11 11
#define TWCD_FILE12 12
#define TWCD_FILE13 13
#define TWCD_FILE14 14
#define TWCD_FILE15 15
#define TWCD_FILE16 16
#define TWCD_FILE17 17
#define TWCD_FILE18 18
#define TWCD_FILE19 19
#define TWCD_FILE20 20
#define TWCD_FILE21 21
#define TWCD_FILE22 22
#define TWCD_FILE23 23
#define TWCD_FILE24 24
#define TWCD_FILE25 25
#define TWCD_FILE26 26
#define TWCD_FILE27 27
#define TWCD_FILE28 28
#define TWCD_FILE29 29
#define TWCD_FILE30 30
#define TWCD_FILE31 31
#define TWCD_FILE32 32
#define TWCD_FILE33 33
#define TWCD_FILE34 34
#define TWCD_FILE35 35
#define TWCD_FILE36 36
#define TWCD_FILE37 37
#define TWCD_FILE38 38
#define TWCD_FILE39 39
#define TWCD_FILE40 40
#define TWCD_FILE41 41
#define TWCD_FILE42 42
#define TWCD_FILE43 43
#define TWCD_FILE44 44
#define TWCD_FILE45 45
#define TWCD_FILE46 46
#define TWCD_FILE47 47
#define TWCD_FILE48 48
#define TWCD_FILE49 49
#define TWCD_FILE50 50
#define TWCD_FILE51 51
#define TWCD_FILE52 52
#define TWCD_FILE53 53
#define TWCD_FILE54 54
#define TWCD_FILE55 55
#define TWCD_FILE56 56
#define TWCD_FILE57 57
#define TWCD_FILE58 58
#define TWCD_FILE59 59
#define TWCD_FILE60 60
// ICAP_ECDOAGGRESSIVENESS
// Family: Blaze, Falcon, Panther, Piranha2
// Type: TWTY_INT32
// Container: Range (per output stream, bitonal only)
// Allowed: -10 to 10
// Default: 0
// Notes: Change the amount of multi-color dropout applied to
// a bitonal image.
#define ICAP_ECDOAGGRESSIVENESS 0x8103
// ICAP_ECDOTREATASCOLOR
// Family: A2O2
// Type: TWTY_BOOL
// Container: OneValue (per camera)
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Allows you to indicate that a color other than black or
// dark blue ink was used for the data entered on the form.
// This is not available when ECDO is set to (none).
// This feature is not available for all models.
#define ICAP_ECDOTREATASCOLOR 0x80C3
// ICAP_FILTERBACKGROUND
// Family: A2O2, Alf, Alien, Fosters, Inferno, Mustang2, Phoenix,
// Piranha, Pony, Prism, Wildfire
// Type: TWTY_UINT16
// Container: Range
// Allowed: 0 - 255
// Default: 245
// Notes: Selects the grayscale color to replace the dropout
// color when capturing bitonal images...
#define ICAP_FILTERBACKGROUND 0x8026
// ICAP_FILTERENUM
// Family: A2O2, Alf, Alien, Blaze, Falcon, Fosters, Inferno,
// Mustang2, Panther, Phoenix, Piranha, Piranha2, Pony,
// Prism, Rufous, Wildfire
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: See ICAP_FILTER
// Default: TWFT_NONE
// Notes: Tied to ICAP_FILTER...
// ICAP_FILTER is an array...and we need an enum (sigh)...
#define ICAP_FILTERENUM 0x8024
// ICAP_FILTERPROCESSING
// Family: Phoenix
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: TWFP_NORMAL, TWFP_LOWRES
// Default: TWFP_NORMAL
// Notes: If color dropout at low resolutions results in
// unwanted artifacts, try changing this capability
// to TWFP_LOWRES.
#define ICAP_FILTERPROCESSING 0x8088
#define TWFP_NORMAL 0
#define TWFP_LOWRES 1
// ICAP_FILTERTHRESHOLD
// Family: A2O2, Alf, Alien, Fosters, Inferno, Mustang2, Phoenix,
// Piranha, Pony, Prism, Wildfire
// Type: TWTY_UINT16
// Container: Range
// Allowed: 0 - 255
// Default: 175
// Notes: Selects the threshold point of the color data when
// capturing bitonal images...
#define ICAP_FILTERTHRESHOLD 0x8025
// ICAP_FLIPBACKGROUNDCOLOR
// Family: Gemini
// Type: TWTY_BOOL
// Container: OneValue (per camera)
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: 5000/7000 only. This is Border Reduction. A feature
// that changes the borders on the left and the right to
// white the opposite pixel flavor 'color'. A value of
// TRUE does the change, a value of FALSE leaves it as is...
#define ICAP_FLIPBACKGROUNDCOLOR 0x8043
// ICAP_FORCECOMPRESSION
// Family: Gemini, Inferno, Phoenix, Prism, Wildfire, Viper
// Type: TWTY_UINT16
// Container: Enumeration (per camera)
// Allowed: same rules as ICAP_COMPRESSION
// Default: TWCP_NONE
// Notes: A throughput efficiency mechanism. If an application
// requires uncompressed data, but the size of the image
// is more than SCSI can manage, then use this capability
// to force the scanner to compress the data, and the
// Source to decompress in software before transferring
// it to the application. Note that with the Prism
// this value is always TWCP_JPEG for the color cameras.
#define ICAP_FORCECOMPRESSION 0x8008
// ICAP_FOREGROUNDBOLDNESSAGGRESSIVENESS
// Family: Falcon
// Type: TWTY_INT32
// Container: Range (per color camera)
// Allowed: -10 to 10
// Default: 0
// Notes: The foreground boldness aggressiveness setting.
// This setting only has meaning if
// ICAP_FOREGROUNDBOLDNESSMODE is TWFB_AUTOMATIC.
#define ICAP_FOREGROUNDBOLDNESSAGGRESSIVENESS 0x810E
// ICAP_FOREGROUNDBOLDNESSMODE
// Family: Falcon
// Type: TWTY_UINT16
// Container: Enumeration (per color camera)
// Allowed: TWFB_NONE, TWFB_AUTOMATICBASIC, TWFB_AUTOMATIC
// Default: TWFB_NONE
// Notes: The foreground boldness mode
#define ICAP_FOREGROUNDBOLDNESSMODE 0x810F
#define TWFB_NONE 0
#define TWFB_AUTOMATICBASIC 1
#define TWFB_AUTOMATIC 2
// ICAP_FRAMELENGTHCONTROL
// Family: Gemini
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: TRUE
// Notes: 5000/7000 only. Controls the way the scanner detects
// the end of the document. A value of TRUE reflects the
// way all other scanners work. A value of FALSE should
// be used for documents with ragged bottom edges...
#define ICAP_FRAMELENGTHCONTROL 0x8042
// ICAP_FRAMESANGLE
// Family: Blaze, Falcon, Oasis, Panther, Piranha2
// Type: TWTY_FRAMEANGLE
// Container: Enumeration
// Allowed: 0,0 - ICAP_PHYSICALWIDTH,ICAP_PHYSICALHEIGHT
// Default: value of ICAP_SUPPORTEDSIZE
// Notes: With the support of angles it becomes necessary to
// provide a way to specify the coordinates and the
// angle simultaneously, otherwise it's impossible to
// provide proper validation. So if you are working
// with non-zero angles, then use this capability
// instead of ICAP_FRAMES or DAT_IMAGELAYOUT.
#define ICAP_FRAMESANGLE 0x80BB
// ICAP_GAMMAENABLED
// Family: Blaze, Falcon, Inferno, Panther, Phoenix, Piranha2, Wildfire
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: TRUE
// Notes: A value of TRUE causes the scanner to apply
// its gamma table to the image. This only has
// meaning for grayscale output.
#define ICAP_GAMMAENABLED 0x8074
// ICAP_GRAYSCALE
// Family: A2O2, Alf, Alien, Blaze, Falcon, Fosters, Inferno,
// Mustang2, Panther, Phoenix, Piranha, Piranha2, Pony,
// Prism,, Rufous, Wildfire
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: If set to TRUE then the color output will be
// converted to grayscale. You can also get to
// this mode by setting ICAP_PIXELTYPE to
// TWPT_GRAY, though if you do it that way you
// will get grayscale output for both the front
// and the rear images...
#define ICAP_GRAYSCALE 0x802E
// ICAP_HALFTONESQUALITY
// Family: Viper (3590/4500)
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: TWHQ_SOFTWAREFAST and TWHQ_SOFTWAREBEST or
// TWHQ_HARDWAREBEST
// Default: TWHQ_SOFTWAREFAST or TWHQ_HARDWAREBEST
// Notes: Selects the quality/performance of the
// ChromaTHR(tm) software quality settings for
// making bitonal images from color data. If
// a hardware card is present, than it is the
// only option available; otherwise the two
// software options are made available...
#define ICAP_HALFTONESQUALITY 0x801F
#define TWHQ_NONE 0
#define TWHQ_SOFTWAREFAST 1
#define TWHQ_SOFTWAREBEST 2
#define TWHQ_HARDWAREBEST 3
// ICAP_HOLEFILLENABLED
// Family: Falcon, Piranha, Piranha2
// Type: TWTY_BOOL
// Container: OneValue (per output stream)
// Allowed: TRUE / FALSE
// Default: FALSE
// Notes: Hole Fill enabled/disabled.
#define ICAP_HOLEFILLENABLED 0x8104
// ICAP_IMAGEEDGEFILL
// Family: A2O2, Falcon, Fosters, Mustang2, Panther, Piranha,
// Piranha2, Pony, Rufous
// Type: TWTY_UINT16
// Container: Enumeration (per camera)
// Allowed: (see list below)
// Default: TWIE_AUTOMATIC if the scanner is supported.
// Otherwise TWIE_NONE is the default
// Notes: Fills in each edge of the image with the selected color.
// The TWIE_AUTOMATIC and TWIE_AUTOMATICWITHTEAR are not available
// for all scanners.
#define ICAP_IMAGEEDGEFILL 0x8095
#define TWIE_NONE 0
#define TWIE_WHITE 1
#define TWIE_BLACK 2
#define TWIE_AUTOMATIC 3
#define TWIE_AUTOMATICWITHTEAR 4
// ICAP_IMAGEEDGEFILLALLSIDES
// Family: A2O2, Falcon, Fosters, Panther, Piranha, Piranha2, Rufous
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: TRUE
// Notes: Indicates if all of the sides for image edge fill are the same
// value, based on ICAP_IMAGEEDGETOP
#define ICAP_IMAGEEDGEFILLALLSIDES 0x80B9
#define ICAP_IMAGEEDGEFILLALLSIZE 0x80B9 // Deprecated TWAIN 10.x+
// ICAP_IMAGEEDGE*
// Family: A2O2, Falcon, Fosters, Mustang2, Panther, Piranha, Piranha2,
// Pony, Rufous
// Type: TWTY_FIX32
// Container: Range (per camera)
// Allowed: 0 to ICAP_PHYSICALWIDTH for left and right
// 0 to ICAP_PHYSICALHEIGHT for the the top and bottom
// Default: 0
// Notes: Amount of fill for the left/right/top/bottom edge of the image
#define ICAP_IMAGEEDGELEFT 0x8096
#define ICAP_IMAGEEDGERIGHT 0x8097
#define ICAP_IMAGEEDGETOP 0x8098
#define ICAP_IMAGEEDGEBOTTOM 0x8099
// ICAP_IMAGEFILEFORMAT
// Family: (all)
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: TWFF_BMP, TWFF_JFIF, TWFF_TIFF, TWFF_RAW...
// Default: TWFF_BMP
// Notes: This is a standard TWAIN capability, we're just
// adding a custom argument to it
#define TWFF_RAW 0x8001
#define TWFF_RAWBMP 0x8002
// CAP_IMAGEMAGNIFICATIONFACTOR
// Family: n/a
// Type: TWTY_UINT16
// Container: Range
// Allowed: 0 - 255
// Default: 0
// Notes: Helps the scanner determine the 'real' size of images
// coming from the P-Card. This information is used to
// optimize buffer thresholding.
// This capability is not available at this time.
#define CAP_IMAGEMAGNIFICATIONFACTOR 0x806B
// ICAP_LAMPSAVER
// Family: Prism, Viper
// Type: TWTY_BOOL
// Container: OneValue
// Allowed: TRUE / FALSE
// Default: TRUE
// Notes: If TRUE the scanner's lamps will automatically turn off
// after ten minutes of non-use; saving power and extending
// the life of the lamps.
#define ICAP_LAMPSAVER 0x8005
// ICAP_LAMPTIMEOUT
// Family: Prism, Viper
// Type: TWTY_UINT16
// Container: Range
// Allowed: Viper:0,10 Prism:0-30 (minutes)
// Default: 10, 20
// Notes: Controls the lamp saver option. Please note that this
// capability should be used instead of ICAP_LAMPSAVER.
#define ICAP_LAMPTIMEOUT 0x802A
// ICAP_MEDIATYPE
// Family: A2O2, Blaze, Falcon, Fosters, Panther, Piranha, Piranha2, Rufous
// Type: TWTY_UINT16
// Container: Enumeration (per camera)
// Allowed: See below
// Default: TWMT_PLAINPAPER
// Notes: Allows user to select type of media being scanned.
// The front and rear camera setting must be the same.
#define ICAP_MEDIATYPE 0x80B6
#define TWMT_CARDSTOCK 0
#define TWMT_GLOSSYPAPER 1
#define TWMT_MAGAZINE 2
#define TWMT_PLAINPAPER 3
#define TWMT_THINPAPER 4
// ICAP_ORTHOGONALROTATE
// Family: Blaze, Falcon, Piranha2
// Type: TWTY_UINT16
// Container: Enumeration (per camera)
// Allowed: (see below)
// Default: TWOROT_NONE
// Notes: Orthogonal rotation
#define ICAP_ORTHOGONALROTATE 0x80D5
#define TWOROT_NONE 0
#define TWOROT_AUTOMATIC 1
#define TWOROT_90 2
#define TWOROT_180 3
#define TWOROT_270 4
#define TWOROT_AUTOMATIC_90 5
#define TWOROT_AUTOMATIC_180 6
#define TWOROT_AUTOMATIC_270 7
// ICAP_OVERSCANX
// Family: A2O2, Alf, Alien, Blaze, Falcon, Fosters, Inferno, Panther,
// Phoenix, Piranha, Piranha2, Prism, Rufous, Wildfire, Viper
// Type: TWTY_FIX32
// Container: Range (per camera)
// Allowed: 3500: 0-0.5" All others: 0-0.375"
// Default: 3500: 0.5" All others: 0.375"
// Notes: Amount of overscan (in ICAP_UNITS) on the left and
// right sides of the cropping region.
#define ICAP_OVERSCANX 0x8006
// ICAP_OVERSCANY
// Family: A2O2, Alf, Alien, Blaze, Falcon, Fosters, Inferno, Panther,
// Phoenix, Piranha, Piranha2, Prism, Rufous, Wildfire, Viper
// Type: TWTY_FIX32
// Container: Range (per camera)
// Allowed: 3500: 0-0.5" All others: 0-0.375"
// Default: 3500: 0.5" All others: 0.375"
// Notes: Amount of overscan (in ICAP_UNITS) on the top and
// bottom sides of the cropping region.
#define ICAP_OVERSCANY 0x8007
// ICAP_PADDING
// Family: n/a
// Type: TWTY_UINT16
// Container: Enumeration
// Allowed: (see list below)
// Default: TWPG_AUTO
// Notes: Selects the padding to force the bytes-per-row
// (or the stride) to always land on a specific
// boundry...
#define ICAP_PADDING 0x80AA
#define TWPG_AUTO 0
#define TWPG_NONE 1
#define TWPG_BYTE 2
#define TWPG_WORD 3
#define TWPG_LONGWORD 4
#define TWPG_OCTAWORD 5
// ICAP_PHYSICALHEIGHTADJUST
// Family: Blaze, Falcon, Panther, Piranha2
// Type: TWTY_FIX32
// Container: Range
// Allowed: Scanner specific
// Default: Scanner specific
// Notes: Adjusts the value of ICAP_PHYSICALHEIGHT. Applications must
// set this value to have access to the full scan length of the
// ADF.
#define ICAP_PHYSICALHEIGHTADJUST 0x8101
// ICAP_SKEWANGLE
// Family: A2O2, Blaze, Falcon, Fosters, Panther, Piranha, Piranha2, Rufous
// Type: TWTY_UINT16
// Container: Range
// Allowed: -360000 - 360000
// Default: 0
// Notes: Selects the deskew angle for fixed cropping.
#define ICAP_SKEWANGLE 0x80B5
// ICAP_STREAKREMOVALAGGRESSIVENESS
// Family: Blaze, Falcon, Panther, Piranha, Piranha2
// Type: TWTY_INT32
// Container: Range
// Allowed: -2 to 2
// Default: 0
// Notes: Streak removal aggressiveness level. -2 is least aggressive
// while 2 is most aggressive. The aggressiveness level is
// meaningless if streak removal �enabled� is FALSE.
#define ICAP_STREAKREMOVALAGGRESSIVENESS 0x80C7
// ICAP_STREAKREMOVALENABLED
// Family: Blaze, Falcon, Panther, Piranha, Piranha2
// Type: TWTY_BOOL
// Container: OneValue (per output stream)
// Allowed: TRUE / FALSE
// Default: Piranha: FALSE
// Others: TRUE
// Notes: Streak Removal enabled/disabled. If TRUE, then the
// streak removal �aggressiveness level� has meaning.
#define ICAP_STREAKREMOVALENABLED 0x80C6
// ICAP_VERTICALBLACKLINEREMOVAL
// Family: Prism (not implemented, ignore this for now)
// Type: TWTY_BOOL
// Container: OneValue (per camera)
// Allowed: TRUE/FALSE
// Default: TRUE
// Notes: Controls vertical black line removal (VBLR).
// Only supported for bitonal with ATP...
#define ICAP_VERTICALBLACKLINEREMOVAL 0x8021
////////////////////////////////////////////////////////////////////////////////
// DAT Section
////////////////////////////////////////////////////////////////////////////////
//
// A2O2/Falcon/Inferno/Phoenix/Piranha/Piranha2/Wildfire auto color learning
// (DG_CONTROL)...
// Notes: This utility will determine the proper �Color Amount� value
// to use with the current �Color Threshold� value, in order to
// save a representative stack of color documents as either color
// or grayscale images...
#define DAT_AUTOCOLORLEARN 0x8006
//
// Color Table Map (DG_CONTROL)...
// Notes: This data structure allows an application to
// map the ICAP_COLORTABLE numeric values to
// both the English and current language strings.
// The call allocates the data structure. The
// application parses the items (a value of
// 0xFFFF for ColorTableValue indicates the end
// of the array).
#define DAT_COLORTABLEMAP 0x8003
typedef struct
{
TW_UINT16 ColorTableValue;
TW_STR255 szEnglish;
TW_STR255 szCurrent;
} TW_COLORTABLEMAP, *pTW_COLORTABLEMAP;
//
// Device Information
// Notes: This data structure provides additional
// information about the device that may be
// useful with some system message, such
// as WM_DEVICECHANGE. The dwFields value
// indicates how many fields are supported
// by the driver (the value doesn't include
// the dwFields, itself)...
//
// dwModelNumber - ex: 200, 990, 3520...
// szModelName - ex: i200, 990...
// szProtocol - ex: ASPI, SCSISCAN...
// dwFirmware - ex: 10427 (1.4.27)
//
// Only if szProtocol is SCSISCAN
// szDeviceName - \\.\Scanner# style
// szDeviceChange - \\?\SBP2... style
//
// Only if szProtocol is ASPI
// dwHostAdapter
// dwTarget
//
#define DAT_DEVICEINFO 0x8005
#define TWCNST_DEVICEINFOFIELDS 9
typedef struct
{
TW_UINT32 dwFields;
TW_UINT32 dwModelNumber; // field 1
TW_STR255 szModelName; // field 2
TW_STR255 szProtocol; // field 3
TW_STR255 szDeviceName; // field 4
TW_UINT32 dwHostAdapter; // field 5
TW_UINT32 dwTarget; // field 6
// put new fields here...
TW_STR255 szDeviceChange; // field 7 + 256 = 256
TW_UINT32 dwFirmware; // field 8 + 32 = 288
TW_STR255 szDriverFilename; // field 9 + 256 = 544
// always reduce this if we add fields...
TW_UINT8 reserved[65536-544];
} TW_DEVICEINFO, *pTW_DEVICEINFO;
// Driver Electronic Color Dropout (for drivers that support ICAP_ECDO)
//
// Notes: Use this structure to explore and manage dropout colors.
//
// This data structure allows an application to map the ICAP_ECDO
// numeric values to both the English and current language strings.
// ICAP_ECDO is used to select a dropout color for the current camera.
//
// The driver will allocate the returned data structure.
//
// To get the list of dropout choices (for when an application wants
// to present the list on its own user interface):
// -----------------------------------------------------------------
// 1. Application calls DG_CONTROL / DAT_ECDO / MSG_GET to get
// the list of all the choices.
// 2. Driver returns the list of choices (i.e. fills in the
// TW_ECDO structure for each choice).
// 3. Application loops through the returned list until both szEnglish
// and szCurrent are blank (which indicates the end of the list).
//
// To find a dropout choice (for when an application needs to find
// the TWCD_* for use with ICAP_ECDO):
// -----------------------------------------------------------------
// 1. Application calls DG_CONTROL / DAT_ECDO / MSG_GET to get
// the list of all the choices.
// 2. Driver returns the list of choices (i.e. fills in the
// TW_ECDO structure for each choice).
// 3. Application loops through the returned list until it finds the
// desired English dropout name (use szEnglish because this will
// always be consistent no matter what the language of the driver
// is; where szCurrrent will be based on the driver's current
// language, which may be different then the last time the list
// was returned).
// 4. Application uses the EcdoValue of the desired dropout choice
// as the setting for ICAP_ECDO. This means the EcdoValue
// will be one of the TWCD_* defines (e.g. TWCD_FILE01).
//
#define DAT_ECDO 0x800A
typedef struct
{
TW_UINT16 EcdoValue;
TW_STR255 szEcdo;
TW_STR255 szText;
TW_UINT8 Reserved[1024]; // Room for more stuff
} TW_ECDO, *pTW_ECDO;
// Driver Logs (DG_CONTROL / DAT_LOG / MSG_GET)
//
// This will get a log and save it in the provided file. There are text based logs and XML based
// logs. Some logs are scanner specific, so the content will not be common among all scanner
// families, and some are common so the content can be common among all scanners.
//
// Text based logs are ones that can be easily viewed in something like Notepad, each log entry
// will be on its own line. These logs contain the same information as is shown on the driver UI
// on the Log tab. The language for the translated text will be based on the current language
// selected for the driver.
//
// The XML based logs will contain data in a XML format. For details on the XML format for
// a log, refer to the TWAIN_Features.htm in the Intergrator�s Guide.
//
// For devices that support the Flatbed as an accessory (e.g. i1300, i1400), the application
// will need to make a second call to get the flatbed�s information (see DeviceType below). This
// is necessary because the flatbed is a separate device.
//
// To generate an EKLOG specify a LogType of TWGL_EKLOG. The DeviceType is ignored. The
// Filename specifies the full path and file for the log, and it should end in .eklog.
// The Description is stored with the EKLOG. Use SaveImages to specify if .tif and .jpg
// files should be included (including them may result in a very large EKLOG file).
//
#define DAT_LOG 0x800C
typedef struct {
TW_UINT16 LogType; // log to get (see TWGL_*)
TW_UINT16 DeviceType; // ADF or Flatbed (see TWDV_*)
TW_STR255 Filename; // full path and name to store log into
TW_STR255 Description; // Reason for log (use with TWLG_EKLOG)
TW_BOOL SaveImages; // Save images (use with TWLG_EKLOG)
TW_UINT8 Reserved[254]; // Room for future expansion
} TW_LOG, *pTW_LOG;
// different logs that can be retrieved via DAT_LOG. The comment indicate whether the
// log is text based or XML base, and whether it is common among all scanner families or not.
#define TWGL_GENERAL 0 // text, not common
#define TWGL_OPERATOR 1 // text, not common
#define TWGL_GENERAL_XML 2 // XML, common
#define TWGL_EKLOG 3 // EKLOG (TWDV_* value is ignored)
// different devices, which can be used by multiple CAPs/ICAPs/DATs
#define TWDV_UNKNOWN 0 // unknown/reserved
#define TWDV_ADF 1 // base scanner
#define TWDV_FLATBED 2 // flatbed scanner
// OCP buttons (DG_CONTROL / DAT_OCPBUTTONS / MSG_SET)
//
// Scanner supported: Falcon, Piranha2
// Max number of buttons: 9
//
// This feature allows the application to set the displayed text on the OCP for
// each button. It also allows the application to set the Paper Source for each
// button. The driver may not remember this information. So we recommand
// that the application should send the text after successfully MSG_OPENDS.
//
// To configure the number of buttons for the user to scroll through, the
// App must send an array of TW_OCPBUTTONS structures which has the number
// of the buttons defined plus an extra one that has Text field blank.
// For example, if the user wants to setup the text for 3 buttons then
// define the array of 4 TW_OCPBUTTONS structures. Set the Text for each
// the first 3 items and set the Text to blank for the 4th.
//
// For the scanners that don�t have the ability to display the text, the
// application still can configure the number of buttons for the user
// to scroll through.
//
// The order of the buttons displayed on the OCP is the same order of the
// buttons defined in the array.
//
// The Text is in the current language. The Ansi code page which is based
// on the CAP_LANGUAGE is used for the conversion.
//
// The Paper Source value to pass in is the TWAIN enum value for the Paper
// Source associated with the button. For eaxmple, TWPU_ADF is the enum value
// associated with the "adf" paper source. For the complete list of Paper
// Source enums, look at the TWPU_* definitions under CAP_PAPERSOURCE.
//
// The NumDataFields value refers to the number of data fields to follow.
// If the PaperSource field is being set, then NumDataFields must be set to 1.
// In the future, we could add other data fields, in which case NumDataFields
// would be incremented by the caller.
//
// The Reserved field must be initialized to zero.
//
// For example, if setting a button to "Color PDF" and the paper source is
// "Document Feeder", then:
// Text = "Color PDF"
// NumDataFields = 1
// PaperSource = TWPU_ADF
//
#define DAT_OCPBUTTONS 0x800E
typedef struct {
TW_STR255 Text; // Displayed text on OCP for a button
TW_UINT32 NumDataFields; // Number of fields of data that follow this field
TW_UINT32 PaperSource; // TWPU_* enum from CAP_PAPERSOURCE
TW_UINT8 Reserved[504]; // Room for future expansion
} TW_OCPBUTTONS, *pTW_OCPBUTTONS;
//
// Alien Personality Card (DG_CONTROL)...
// Notes: These represent the common commands that pcards
// may support. Other commands documented by the
// manufacturer of the card may be accessed using
// the DAT_PASSTHRU operation...
#define DAT_PCARD 0x8002
typedef struct
{
TW_UINT32 StructSize;
TW_UINT32 Action;
TW_UINT32 DataSize;
TW_MEMREF Data;
} TW_PCARD, *pTW_PCARD;
// Additional return codes...
#define TWRC_PCARD_CHECKSTATUS 0x8002 // something interesting has happened
#define TWRC_PCARD_FATAL 0x8003 // the card is dead
#define TWRC_PCARD_RETRYIMAGE 0x8004 // the image failed a quality test
#define TWRC_PCARD_NOCARD 0x8005 // no card installed
// Supported actions...
#define TWPCD_ACTION_INQUIRY 0
#define TWPCD_ACTION_STATUS 1
#define TWPCD_ACTION_ATTRIBUTES 2
#define TWPCD_ACTION_DIAGNOSTIC 3
// Support structures for the various actions...
typedef struct
{
TW_INT8 StructSize[4]; // 0-3
TW_INT8 VendorId[8]; // 4-11
TW_INT8 ProductId[16]; // 12-27
TW_INT8 RevisionNumber[4]; // 28-31
TW_INT8 BuildNumber[2]; // 32-33
TW_INT8 Reserved[2048-34]; // 34-2048
} TW_PCARD_INQUIRY, FAR * pTW_PCARD_INQUIRY;
typedef struct
{
TW_INT8 StructSize[4]; // 0-3
TW_INT8 Code[4]; // 4-7
TW_INT8 Severity; // 8
TW_INT8 Text[1011]; // 9-1019
TW_INT8 Reserved[2048-1020]; // 1020-2048
} TW_PCARD_STATUS, *pTW_PCARD_STATUS;
typedef struct
{
TW_INT8 StructSize[4]; // 0-3
} TW_PCARD_ATTRIBUTES, *pTW_PCARD_ATTRIBUTES;
typedef struct
{
TW_INT8 StructSize[4]; // 0-3
} TW_PCARD_HEADER, *pTW_PCARD_HEADER;
// Driver Profiles (for drivers that support CAP_PROFILES)
//
// Notes: Use this structure to explore and manage profiles. These profiles
// are compatible with DAT_CUSTOMDSDATA.
//
// This data structure allows an application to map the CAP_PROFILES
// numeric values to both the English and current language strings.
//
// To get the list of profiles (for when an application wants to
// present the list on its own user interface):
// -----------------------------------------------------------------
// 1. Application calls DG_CONTROL / DAT_PROFILES / MSG_GET to get
// the list of all the profiles.
// 2. Driver returns the list of profiles (i.e. fills in the
// TW_PROFILES structure for each profile)
// 3. Application loops through the returned list until both szEnglish
// and szName are blank (which indicates the end of the list)
//
// To find a profile (for when an application needs to find the
// TWPO_* for use with CAP_PROFILES):
// -----------------------------------------------------------------
// 1. Application calls DG_CONTROL / DAT_PROFILES / MSG_GET to get
// the list of all the profiles.
// 2. Driver returns the list of profiles (i.e. fills in the
// TW_PROFILES structure for each profile)
// 3. Application loops through the returned list until it finds the
// desired English profile name (use szEnglish because this will
// always be consistent no matter what the language of the driver
// is; where szName will be based on the driver's current
// language, which may be different then the last time the list
// was returned) OR ID. The application should use szEnglish name
// if they want to always find a specific profile (i.e. Black and
// White Doc) OR use ID when it doesn't care about specific names,
// but wants to use unique IDs to get the same profile even if the
// user renames it.
// 4. Application uses the ProfilesValue of the desired profile as
// the setting for CAP_PROFILES. This means the ProfilesValue
// will be one of the TWPO_* defines (e.g. TWPO_FILE01).
//
// Unless otherwise specified, start with a structure set to all zeros
// (i.e. memset to 0), then fill in all required fields, and then fill
// in any optional fields as desired
//
// To create a new profile (version 10.x+):
// -----------------------------------------------------------------
// - Application calls DG_CONTROL / DAT_PROFILES / MSG_PROFILECREATE
// - Required:
// szName - Name of the new profile
// - Optional:
// szFilename - Graphic filename associate with a new profile
// - Errors:
// If the new profile name is already existed then the driver
// driver will return TWCC_BADVALUE
//
// To save the current driver settings (version 10.x+):
// -----------------------------------------------------------------
// - Application calls DG_CONTROL / DAT_PROFILES / MSG_PROFILESAVE
// - Required: (none)
// - Optional: (none)
// - Errors: (none)
//
// To delete the current profile (version 10.x+):
// -----------------------------------------------------------------
// - Application calls DG_CONTROL / DAT_PROFILES / MSG_PROFILEDELETE
// - Required: (none)
// - Optional:
// szEnglish - English name of profile that will be selected
// after deletion. If szEnglish is not specified,
// the driver will determine which profile to
// select. If you are deleting the last profile,
// then szEnglish should be blank
// - Error:
// If the profile is readonly or the profile state is
// TWPRF_PROFILESTATE_MODIFIED, the driver will return TWCC_DENIED
//
// To rename the current profile (version 10.x+):
// -----------------------------------------------------------------
// - Application calls DG_CONTROL / DAT_PROFILES / MSG_PROFILERENAME
// - Required: At least specify one of the option below
// - Optional: (can specify szCurrent or szFilename or both)
// szName - Name of the profile; if not supplied, the name
// will not be changed
// szFilename - Graphic filename associate with a new profile;
// if not supplied, the graphic will not be changed
// - Error:
// If the profile is readonly or the profile state is
// TWPRF_PROFILESTATE_MODIFIED, the driver will return TWCC_DENIED
//
// To restore all the supplied profiles to what was installed (v10.x+):
// -----------------------------------------------------------------
// - Application calls DG_CONTROL / DAT_PROFILES / MSG_PROFILERESTORE
// - Required:
// blSharedSettings - Include settings shared across profiles
// (e.g. Power Saver)
// - Optional: (none)
// - Error:
// If profile state is TWPRF_PROFILESTATE_MODIFIED for one of the
// profiles, the driver will return TWCC_DENIED
//
// To export profiles (version 10.x+):
// -----------------------------------------------------------------
// - Application calls DG_CONTROL / DAT_PROFILES / MSG_PROFILEEXPORT
// - Required:
// szFilename - Name of the file to export
// - Optional: (none)
// - Error:
// If profile state is TWPRF_PROFILESTATE_MODIFIED for one of the
// profiles, the driver will return TWCC_DENIED
//
// To import profiles (version 10.x+):
// -----------------------------------------------------------------
// - Application calls DG_CONTROL / DAT_PROFILES / MSG_PROFILEIMPORT
// This will remove all profiles that have been configured and
// replace them with the imported profiles.
// - Required:
// szFilename - Name of the file to import
// - Optional: (none)
// - Error:
// If profile state is TWPRF_PROFILESTATE_MODIFIED for one of the
// profiles, the driver will return TWCC_DENIED
//
// To set current profile (version 10.x+):
// -----------------------------------------------------------------
// - Application calls DG_CONTROL / DAT_PROFILES / MSG_PROFILESET
// - Required:
// szEnglish - English name of the profile to be selected
// - Optional: (none)
// - Error: (none)
//
#define DAT_PROFILES 0x8007
typedef struct
{
TW_UINT16 ProfilesValue; // CAP_PROFILES TWPO_* value
TW_STR255 szFamily; // Deprecated TWAIN 10.x+
TW_STR255 szId; // unique profile ID
TW_STR255 szEnglish; // profile name in English
TW_STR255 szCurrent; // Deprecated TWAIN 10.x+
TW_UINT32 Group; // group type (see TWPRF_GROUP_*)
TW_BOOL Readonly; // cannot be modifed or deleted?
TW_BOOL Default; // a default profile?
TW_UINT32 DriverVersion; // Deprecated TWAIN 10.x+
TW_STR255 szMethod; // Deprecated TWAIN 10.x+
// the following are valid version 10.x+
TW_STR255 szName; // profile name in the current language.
// Uses the Ansi code page. The
// language is based on CAP_LANGUAGE
TW_STR255 szFilename; // Full path and filename to a file
// The filename is either graphic filename
// or profile filename based on the MSG
// See the description above for more details
TW_BOOL blSharedSettings; // Indicates whether the shared profile
// settings are to be reset as well.
TW_UINT16 ProfileState; // Profile state (see TWPRF_PROFILESTATE_*)
TW_UINT8 Reserved[508]; // Room for more stuff, always set to 0.
} TW_PROFILES, *pTW_PROFILES;
// group types for TW_PROFILES
#define TWPRF_GROUP_ALL 0
// The profile state. There can only be one profile in the
// profile list that is not normal.
#define TWPRF_PROFILESTATE_NORMAL 0 // Not selected or modified
#define TWPRF_PROFILESTATE_CURRENT 1 // Currently selected profile
#define TWPRF_PROFILESTATE_MODIFIED 2 // Currently selected and has been modified
// Notes: This operation is used by the application to
// DG_CONTROL / DAT_QUERYSUPPORT/ MSG_GET or MSG_GETCURRENT or
// MSG_GETDEFAULT. This allows the application to find out if the DAT
// capability is supported or not.
#define DAT_QUERYSUPPORT 0x800B
typedef struct {
TW_UINT32 DG;
TW_UINT16 DAT;
TW_UINT16 MSG[64]; //Return the array of supported MSG
}TW_QUERYSUPPORT, FAR *pTW_QUERYSUPPORT;
//
// Gemini/Viper RAW Status (DG_CONTROL)...
// Notes: This command may be issued at any time. It reports
// the raw data for the last error status reported by
// the scanner. These are device dependent values
// which may be reported for servicing issues, but
// should not be used to drive code...
//
#define DAT_STATUSRAW 0x8001
typedef struct
{
TW_INT32 LastToolkitStatus;
TW_INT32 LastSenseData[3];
TW_STR255 LastText;
TW_INT32 CurrentState;
TW_INT32 LastKDSStatus;
} TW_STATUSRAW, *pTW_STATUSRAW;
//
// Window Management
// Notes: Use this structure to add and remove windows.
// A window is an index to a set of cameras, such
// as front_bitonal, front_color, etc...
//
#define DAT_WINDOW 0x8008
typedef struct
{
TW_UINT16 WindowCamera; // CAP_WINDOWCAMERA value
TW_UINT8 Reserved[1024]; // Room for more stuff
} TW_WINDOW, *pTW_WINDOW;
#define TWTY_FRAMEANGLE 0x8001
typedef struct {
TW_FIX32 Left; // same as TW_FRAME.Left
TW_FIX32 Top; // same as TW_FRAME.Top
TW_FIX32 Right; // same as TW_FRAME.Right
TW_FIX32 Bottom; // same as TW_FRAME.Bottom
TW_INT32 Angle; // -3600000 to +3600000
} TW_FRAMEANGLE, FAR * pTW_FRAMEANGLE;
////////////////////////////////////////////////////////////////////////////////
// MSG Section
////////////////////////////////////////////////////////////////////////////////
//
// All Disable/Enable UI...
// Notes: This message is added to DG_CONTROL / DAT_USERINTERFACE
// to allow the application to temporarily disable access
// to the Source's GUI.
//
#define MSG_DISABLEUI 0x8003
#define MSG_ENABLEUI 0x8004
//
// All Enable Scanner...
// Notes: This message is added to DG_CONTROL / DAT_USERINTERFACE
// to allow the user to enable the scanner. The main use
// for this command is to allow a filter writer to split
// a MSG_ENABLEDS into a MSG_SETUPDS followed by a
// MSG_ENABLESCANNER, allowing the filter to interrogate
// the scanner about its current setting before moving paper.
// This command is only permitted in State 4, and if ShowUI
// is set to FALSE...
//
#define MSG_ENABLESCANNER 0x8006
//
// All Special Get...
// Notes: Used to get data out of sequence with the specification.
// The only example at this time is use with DG_IMAGE /
// DAT_EXTIMAGEINFO...
//
#define MSG_GETSPECIAL 0x8005
//
// Profile messages...
// Notes: Use these with DG_CONTROL / DAT_PROFILES.
//
#define MSG_SAVEPROFILE 0x8008 // Deprecated TWAIN 10.x+
#define MSG_DELETEPROFILE 0x8009 // Deprecated TWAIN 10.x+
#define MSG_PROFILECREATE 0x8015
#define MSG_PROFILEDELETE 0x8016
#define MSG_PROFILESAVE 0x8017
#define MSG_PROFILERENAME 0x8018
#define MSG_PROFILERESTORE 0x8019
#define MSG_PROFILEEXPORT 0x801A
#define MSG_PROFILEIMPORT 0x801B
#define MSG_PROFILESET 0x801C
//
// All Setup DS...
// Notes: This message is added to DG_CONTROL / DAT_USERINTERFACE
// to allow the user download the current settings without
// initiating a scanning session. The state remains at 4,
// no matter what the outcome of the command.
// To select the current settings see CAP_PROFILES or CUSTOMDSDATA
//
#define MSG_SETUPDS 0x8002
//
// Window messages...
// Notes: Use these with DG_CONTROL / DAT_WINDOW.
//
#define MSG_ADDWINDOW 0x8011
#define MSG_DELETEWINDOW 0x8012
// OBS_JPEGQUALITY
// Notes: Same as standard ICAP_JPEGQUALITY, do not use.
#define OBS_JPEGQUALITY 0x8040
//
// All Stop Feeder...
// Notes: This message is added to DG_CONTROL / DAT_PENDINGXFERS
// to allow the user to turn off the transport.
// Do not use this message, use MSG_STOPFEEDER...
//
#define OBS_STOPFEEDER 0x8001
////////////////////////////////////////////////////////////////////////////////
// TW Section
////////////////////////////////////////////////////////////////////////////////
// Filter...
#define TWRC_FILTER_CONTINUE 0x8010
//
// Prism/Wildfire Patchcode extensions...
// Notes: This section extends the patch codes to match those
// supported by the Prism/Wildfire scanner family. Note that
// a transfer patch is interpreted to be a level 2 or
// a level three, so even though it can be set, a
// transfer patch is never received as part of the
// extended image info data...
//
#define TWPCH_PATCHT2 0x8001
#define TWPCH_PATCHT3 0x8002
#define TWEJ_PATCHT2 0x8001
#define TWEJ_PATCHT3 0x8002
//
// QuerySupport extensions...
//
#define TWQC_MACHINE 0x1000
#define TWQC_BITONAL 0x2000
#define TWQC_COLOR 0x4000
#define TWQC_WINDOW 0x8000
// Device Events
//
// The following are the device event supported by all drivers
// prior to version 9.3: TWDE_PAPERDOUBLEFEED and TWDE_PAPERJAM
//
// For version 9.3 drivers and up, the following is a custom
// CAP_DEVICEEVENT the application can ask the driver to send
// it when the lamps need to warmup prior to scanning. This
// event will be issued after a MSG_ENABLEDS if the lamps
// are not warmed up. The number of seconds before the lamps
// are ready will be in the TimeBeforeFirstCapture field of
// the TW_DEVICEVENT structure.
//
// NOTE: The number of seconds may be longer than what it
// actually take. This could happen because an error
// occurred (e.g. opening cover, cancelling) or for
// models that do not have an accurate warmup value.
// Because of this, if your application is displaying
// a �please wait� message for the user, the message
// needs to be closed when MSG_XFERREADY is received.
#define TWDE_LAMPWARMUP 0x8002
// TWEI_HDR_BINARIZATIONQUALITY
//
// This conveys the quality level of the binarized image
// Some binarization methods can detect if the binarization
// resulted in a noisy (or otherwise suspect) output.
// For those binarization method that don't detect this,
// 'normal' is returned.
#define TWBQ_NORMAL 0
#define TWBQ_NOISY 1
////////////////////////////////////////////////////////////////////////////////
// EXTIMAGEINFO Section
////////////////////////////////////////////////////////////////////////////////
//
// Gemini/Inferno/Phoenix/Prism/Viper/Wildfire Custom TWEI_ fields for DAT_EXTIMAGEINFO...
// Notes: These fields return custom image information
// taken from the image header (or footer)...
//
#define TWEI_HDR_PAGESIDE 0x8001 // 0-front 1-rear
#define TWEI_HDR_DOCUMENTCOUNT 0x8002 // Count of pages (seeded by user)
#define TWEI_HDR_LENGTH 0x8003 // Number of bytes of image data
#define TWEI_HDR_LEVEL 0x8004 // Image Address Level
#define TWEI_HDR_MODE 0x8005 // Gemini Mode (1-18)
#define TWEI_HDR_LINELENGTH 0x8006 // Width
#define TWEI_HDR_PAGELENGTH 0x8007 // Height
#define TWEI_HDR_COMPRESSION 0x8008 // ICAP_COMPRESSION TWCP_* value
#define TWEI_HDR_DATE 0x8009 // YY/MM/DD
#define TWEI_HDR_TIME 0x800A // HH/MM/00
#define TWEI_HDR_ROLL 0x800B // Imagelink 990 Film Roll Number
#define TWEI_HDR_RESOLUTION 0x800C // Dots Per Inch (DPI)
#define TWEI_HDR_BITORDER 0x800D // Bit order in a byte
#define TWEI_HDR_SKEW 0x800E // (obsolete)
#define TWEI_HDR_MOMENTARYFLAG 0x800F // Gemini Momentary
#define TWEI_HDR_LATCHEDFLAG 0x8010 // Gemini Latched
#define TWEI_HDR_BARCODE 0x8011 // Gemini Barcode(s)
#define TWEI_HDR_DESKEW 0x8012 // Deskew status
#define TWEI_HDR_DESKEWANGLE 0x8013 // Deskew angle
#define TWEI_HDR_POLARITY 0x8014 // ICAP_PIXELFLAVOR TWPF_* value
#define TWEI_HDR_PRINTERSTRING 0x8015 // Viper/Prism/Wildfire printed string
#define TWEI_HDR_PRINTERINDEX 0x8016 // Kinda like the document count
#define TWEI_HDR_IMAGENUMBER 0x8017 // Count images this session
#define TWEI_HDR_PAGENUMBER 0x8018 // Count sheets of paper this session
#define TWEI_HDR_PAGEIMAGENUMBER 0x8019 // Image count on a page (1 - 4)
#define TWEI_HDR_BOOKNAME_A 0x801A // Fixed field Gemini/Prism/Wildfire A
#define TWEI_HDR_BOOKNAME_B 0x801B // Fixed field Prism/Wildfire B
#define TWEI_HDR_BOOKNAME_C 0x801C // Fixed field Prism/Wildfire C
#define TWEI_HDR_BOOKNAME_D 0x801D // Fixed field Prism/Wildfire D
#define TWEI_HDR_IMAGEADDRESSSTRING 0x801E // Prism/Wildfire image address string
#define TWEI_HDR_XOFFSET 0x801F // Left cropping offset
#define TWEI_HDR_YOFFSET 0x8020 // Right cropping offset
#define TWEI_HDR_FEATUREPATCH 0x8021 // Feature patch (only image with patch: i200/i600)
#define TWEI_HDR_IMAGEADDRESSDEFS 0x8022 // Image Address field definitions
#define TWEI_HDR_PCARD_HEADER 0x8023 // Personality-Card Header
#define TWEI_HDR_PCARD_FOOTER 0x8024 // Personality-Card Footer
#define TWEI_HDR_TOKEN_COUNT 0x8025 // Alien token flag
#define TWEI_HDR_REGENERATION 0x8026 // Alien retry count
#define TWEI_HDR_IMAGESTATUS 0x8027 // Alien image status
#define TWEI_HDR_DITHER 0x8028 // Bitonal dithering algorithm used
#define TWEI_HDR_PATCHDETECTED 0x8029 // Patch was found on the document
#define TWEI_HDR_FOLDEDCORNERPERCENTAGE 0x802A // Phoenix folded corner percentage
#define TWEI_HDR_DESKEWCONFIDENCEFACTOR 0x802B // Phoenix deskew confidence factor
#define TWEI_HDR_BITONALCONTRASTPERCENTAGE 0x802C // Phoenix bitonal contrast percentage
#define TWEI_HDR_BITONALCONTRAST 0x802D // Phoenix bitonal contrast
#define TWEI_HDR_BITONALTHRESHOLD 0x802E // Phoenix bitonal threshold
#define TWEI_HDR_SUMHISTOGRAM 0x802F // Phoenix sum historgram
#define TWEI_HDR_DIFFERENCEHISTOGRAM 0x8030 // Phoenix difference histogram
#define TWEI_HDR_GAMMATABLE 0x8031 // Phoenix gamma table
#define TWEI_HDR_MULTIFEED 0x8032 // Multifeed detected
#define TWEI_HDR_DESKEWANGLEACTUAL 0x8033 // Signed deskew angle to scanner precision
#define TWEI_HDR_RAWIMAGEHEADER 0x8034 // Raw image header from scanner
#define TWEI_HDR_LONGPAPERSEGMENT 0x8035 // Long paper segment number
#define TWEI_HDR_LONGPAPERLASTSEGMENT 0x8036 // Long pager last segment
#define TWEI_HDR_AUTOCOLORDETECTED 0x8037 // Auto color detected
#define TWEI_HDR_AUTOCOLORAMOUNT 0x8038 // Auto color amount
#define TWEI_HDR_AUTOCOLORTHRESHOLD 0x8039 // Auto color threshold
#define TWEI_HDR_XML 0x803A // <reportimage> data in XML format (see sample at end of file)
#define TWEI_HDR_DROPOUTSTATUS 0x803B // ECDO Algorithm Status
#define TWEI_HDR_PROCESSINGSTATUS 0x803C // Processing Status
#define TWEI_HDR_BINARIZATIONQUALITY 0x803D // Conveys the quality level of the binarized image
#define TWEI_HDR_DUALSTACKINGSTACK 0x803E // Which output tray a document was dropped into (i5000 only)
// Only valid if dual stacking is enabled; legal values are 1 and 2
////////////////////////////////////////////////////////////////////////////////
// List of custom capabilities in numeric order
////////////////////////////////////////////////////////////////////////////////
/*
CAP_FEEDERKEEPALIVE 0x8001
CAP_PAGESIZELIMIT 0x8002
CAP_TRANSPORTTIMEOUT 0x8003
CAP_WINDOWPOSITION 0x8004
ICAP_LAMPSAVER 0x8005
ICAP_OVERSCANX 0x8006
ICAP_OVERSCANY 0x8007
ICAP_FORCECOMPRESSION 0x8008
CAP_PRINTERWRITESEQUENCESTRING 0x8009
CAP_PRINTERWRITESEQUENCESPACE 0x800A
CAP_PRINTERWRITESEQUENCESPACESTRING 0x800B
CAP_PRINTERWRITESEQUENCEMESSAGE1 0x800C
CAP_PRINTERWRITESEQUENCEMESSAGE2 0x800D
CAP_PRINTERWRITESEQUENCEMESSAGE3 0x800E
CAP_PRINTERWRITESEQUENCEMESSAGE4 0x800F
CAP_PRINTERWRITESEQUENCEMESSAGE5 0x8010
CAP_PRINTERWRITESEQUENCEMESSAGE6 0x8011
CAP_PRINTERWRITESEQUENCEMESSAGE7 0x8012
CAP_PRINTERWRITESEQUENCEMESSAGE8 0x8013
CAP_PRINTERWRITESEQUENCEMESSAGE9 0x8014
CAP_IMAGEADDRESS 0x8015
CAP_IMAGEADDRESSENABLED 0x8016
CAP_DOCUMENTCOUNT 0x8017
CAP_DOCUMENTCOUNTENABLED 0x8018
CAP_MODE 0x8019
CAP_PRINTERINDEXFORMAT 0x801A
CAP_PRINTERINDEXDIGITS 0x801B
CAP_PRINTERDATEDELIMITER 0x801C
CAP_CAMERAENABLE 0x801D
CAP_CAMERAORDER 0x801E
ICAP_HALFTONESQUALITY 0x801F
ICAP_COLORTABLE 0x8020
ICAP_VERTICALBLACKLINEREMOVAL 0x8021
ICAP_CROPPINGMODE 0x8022
ICAP_ADDBORDER 0x8023
ICAP_FILTERENUM 0x8024
ICAP_FILTERTHRESHOLD 0x8025
ICAP_FILTERBACKGROUND 0x8026
CAP_ULTRASONICSENSITIVITY 0x8027
CAP_TRANSPORTTIMEOUTRESPONSE 0x8028
CAP_TRANSPORTAUTOSTART 0x8029
ICAP_LAMPTIMEOUT 0x802A
CAP_BATCHCOUNT 0x802B
CAP_PAPERSOURCE 0x802C
CAP_MULTIFEEDSOUND 0x802D
ICAP_GRAYSCALE 0x802E
CAP_ENERGYSTAR 0x802F
CAP_BINARIZATION 0x8030
CAP_PAGECOUNT 0x8031
CAP_NOWAIT 0x8032
CAP_PRINTERDATEFORMAT 0x8033
CAP_PRINTERWRITESEQUENCEMESSAGE10 0x8034
CAP_PRINTERWRITESEQUENCEMESSAGE11 0x8035
CAP_PRINTERWRITESEQUENCEMESSAGE12 0x8036
CAP_FUNCTIONKEY1 0x8037
CAP_FUNCTIONKEY2 0x8038
CAP_FUNCTIONKEY3 0x8039
CAP_FUNCTIONKEY4 0x803A
CAP_LEVELTOFOLLOW1 0x803B
CAP_LEVELTOFOLLOW2 0x803C
CAP_LEVELTOFOLLOW3 0x803D
CAP_IMAGEADDRESSTEMPLATES 0x803E
CAP_BATCHSTARTFUNCTION 0x803F
OBS_JPEGQUALITY 0x8040
ICAP_COLORSHARPENING 0x8041
ICAP_FRAMELENGTHCONTROL 0x8042
ICAP_FLIPBACKGROUNDCOLOR 0x8043
CAP_PRINTERFONT 0x8044
CAP_PRINTERIMAGEADDRESSFORMAT 0x8045
CAP_PRINTERPOSITION 0x8046
CAP_PRINTERIMAGEADDRESSLEVEL 0x8047
CAP_PRINTERWRITESEQUENCEINDEX 0x8048
CAP_PRINTERWRITESEQUENCE 0x8049
CAP_IMAGEADDRESS_A 0x804A
CAP_IMAGEADDRESS_B 0x804B
CAP_IMAGEADDRESS_C 0x804C
CAP_IMAGEADDRESS_D 0x804D
CAP_BATCHLEVEL 0x804E
CAP_BATCHENDFUNCTION 0x804F
// Reserved 0x8050 - 0x8053
CAP_ENABLECOLORPATCHCODE 0x8054
CAP_FIXEDDOCUMENTSIZE 0x8055
CAP_DOUBLEFEEDSTOP 0x8056
CAP_MULTIFEEDTHICKNESSDETECTION 0x8057
// Reserved 0x8058 - 0x8069
CAP_PCARDENABLED 0x806A
CAP_IMAGEMAGNIFICATIONFACTOR 0x806B
CAP_INDICATORSWARMUP 0x806C
CAP_TOGGLEPATCH 0x806D
CAP_DOUBLEFEEDENDJOB 0x806E
CAP_FEEDERMODE 0x806F
CAP_FOLDEDCORNER 0x8070
CAP_FOLDEDCORNERSENSITIVITY 0x8071
ICAP_GAMMAENABLED 0x8074
CAP_EASYSTACKING 0x8075
// Reserved 0x8076 - 0x8085
CAP_MULTIFEEDCOUNT 0x8086
CAP_PATCHCOUNT 0x8087
ICAP_FILTERPROCESSING 0x8088
CAP_BACKGROUND 0x8089
CAP_PRINTERWRITESEQUENCEMESSAGEINDEX 0x808A
CAP_CHECKDIGIT 0x808B
CAP_BACKGROUNDFRONT 0x808C
CAP_BACKGROUNDREAR 0x808D
CAP_BACKGROUNDPLATEN 0x808E
CAP_ULTRASONICSENSORCENTER 0x808F
CAP_ULTRASONICSENSORLEFT 0x8090
CAP_ULTRASONICSENSORRIGHT 0x8091
ICAP_AUTOCOLORAMOUNT 0x8092
ICAP_AUTOCOLORCONTENT 0x8093
ICAP_AUTOCOLORTHRESHOLD 0x8094
ICAP_IMAGEEDGEFILL 0x8095
ICAP_IMAGEEDGELEFT 0x8096
ICAP_IMAGEEDGERIGHT 0x8097
ICAP_IMAGEEDGETOP 0x8098
ICAP_IMAGEEDGEBOTTOM 0x8099
CAP_BLANKPAGE 0x809A
CAP_BLANKPAGEMODE 0x809B
CAP_BLANKPAGECOMPSIZEBW 0x809C
CAP_BLANKPAGECOMPSIZEGRAY 0x809D
CAP_BLANKPAGECOMPSIZERGB 0x809E
CAP_PROFILES 0x809F
ICAP_ANSELBRIGHTNESS 0x80A0
ICAP_ANSELCONTRAST 0x80A1
ICAP_ANSELHIGHLIGHT 0x80A2
ICAP_ANSELMIDTONE 0x80A3
ICAP_ANSELREMOVEREDEYE 0x80A4
ICAP_ANSELRESTORECOLOR 0x80A5
ICAP_ANSELSATURATECOLORS 0x80A6
ICAP_ANSELSHADOW 0x80A7
ICAP_ANSELSHARPENIMAGE 0x80A8
ICAP_ANSELSHASTA 0x80A9
ICAP_PADDING 0x80AA
ICAP_NEWWINDOWSIZE 0x80AB
ICAP_DOCUMENTTYPE 0x80AC
CAP_WINDOW 0x80AD
ICAP_BACKGROUNDADJUSTMODE 0x80AE
ICAP_BACKGROUNDADJUSTAPPLYTO 0x80AF
ICAP_BACKGROUNDADJUSTAGGRESSIVENESS 0x80B0
ICAP_COLORBALANCEBLUE 0x80B1
ICAP_COLORBALANCEGREEN 0x80B2
ICAP_COLORBALANCERED 0x80B3
CAP_WINDOWCAMERA 0x80B4
ICAP_SKEWANGLE 0x80B5
ICAP_MEDIATYPE 0x80B6
CAP_SIDESDIFFERENT 0x80B7
ICAP_ECDO 0x80B8
ICAP_IMAGEEDGEFILLALLSIDES 0x80B9
CAP_MULTIFEEDRESPONSE 0x80BA
ICAP_FRAMESANGLE 0x80BB
CAP_PRINTERDATE 0x80BC
CAP_PRINTERTIME 0x80BD
CAP_PRINTERFONTFORMAT 0x80BE
CAP_PATCHHEAD1 0x80BF
CAP_PATCHHEAD2 0x80C0
CAP_PATCHHEAD3 0x80C1
CAP_PATCHHEAD4 0x80C2
ICAP_ECDOTREATASCOLOR 0x80C3
CAP_BLANKPAGECONTENT 0x80C4
CAP_IMAGEMERGE 0x80C5
ICAP_STREAKREMOVALENABLED 0x80C6
ICAP_STREAKREMOVALAGGRESSIVENESS 0x80C7
// Reserved 0x80C8 - 0x80FF
CAP_IMAGESDIFFERENT 0x8100
ICAP_PHYSICALHEIGHTADJUST 0x8101
ICAP_COLORSHARPEN 0x8102
ICAP_ECDOAGGRESSIVENESS 0x8103
ICAP_HOLEFILLENABLED 0x8104
CAP_ULTRASONICSENSORLEFTCENTER 0x8105
CAP_ULTRASONICSENSORRIGHTCENTER 0x8106
CAP_ULTRASONICSENSORZONEHEIGHT 0x8107
ICAP_COLORBRIGHTNESSMODE 0x8108
ICAP_COLORBALANCEMODE 0x8109
ICAP_COLORBALANCEAUTOMATICAGGRESSIVENESS 0x810A
CAP_SIMULATING 0x810B
CAP_POWEROFFTIMEOUT 0x810C
CAP_INTELLIGENTDOCUMENTPROTECTION 0x810D
ICAP_FOREGROUNDBOLDNESSAGGRESSIVENESS 0x810E
ICAP_FOREGROUNDBOLDNESSMODE 0x810F
CAP_DUALSTACKINGENABLED 0x8110
CAP_DUALSTACKINGLENGTHMODE 0x8111
CAP_DUALSTACKINGLENGTH1 0x8112
CAP_DUALSTACKINGLENGTH2 0x8113
CAP_DUALSTACKINGMULTIFEED 0x8114
CAP_DUALSTACKINGPATCHTRANSFER 0x8115
CAP_DUALSTACKINGPATCHTYPE1 0x8116
CAP_DUALSTACKINGPATCHTYPE2 0x8117
CAP_DUALSTACKINGPATCHTYPE3 0x8118
CAP_DUALSTACKINGPATCHTYPE4 0x8119
CAP_DUALSTACKINGPATCHTYPE6 0x811A
CAP_DUALSTACKINGSTACK 0x811B
*/
/*
DAT_STATUSRAW 0x8001
DAT_PCARD 0x8002
DAT_COLORTABLEMAP 0x8003
DAT_DEVICEINFO 0x8005
DAT_AUTOCOLORLEARN 0x8006
DAT_PROFILES 0x8007
DAT_WINDOW 0x8008
DAT_CUSTOMDSDATAGROUP 0x8009
DAT_ECDO 0x800A
DAT_QUERYSUPPORT 0x800B
DAT_LOG 0x800C
DAT_UTC 0x800D
DAT_OCPBUTTONS 0x800E
*/
/*
OBS_STOPFEEDER 0x8001
MSG_SETUPDS 0x8002
MSG_DISABLEUI 0x8003
MSG_ENABLEUI 0x8004
MSG_GETSPECIAL 0x8005
MSG_ENABLESCANNER 0x8006
MSG_SAVEPROFILE 0x8008 // Deprecated TWAIN 10.x+
MSG_DELETEPROFILE 0x8009 // Deprecated TWAIN 10.x+
// Reserved 0x8007, 0x800A - 0x8010, 0x8013 - 0x8014
MSG_ADDWINDOW 0x8011
MSG_DELETEWINDOW 0x8012
MSG_PROFILECREATE 0x8015
MSG_PROFILEDELETE 0x8016
MSG_PROFILESAVE 0x8017
MSG_PROFILERENAME 0x8018
MSG_PROFILERESTORE 0x8019
MSG_PROFILEEXPORT 0x801A
MSG_PROFILEIMPORT 0x801B
MSG_PROFILESET 0x801C
*/
/*
TWRC_BUSY 0x8001
TWRC_PCARD_CHECKSTATUS 0x8002
TWRC_PCARD_FATAL 0x8003
TWRC_PCARD_RETRYIMAGE 0x8004
TWRC_PCARD_NOCARD 0x8005
TWRC_FILTER_CONTINUE 0x8010
*/
/*
This is a sample of the kind of data that comes back from
DG_IMAGE / DAT_EXTIMAGEINFO / MSG_GET
when asking for TWEI_HDR_XML...
Results will vary depending on the kind of scanning session,
this example is from MSG_ENABLEDS...
<task id='00000000000000000009' reply='00000000000000000013' bytes='00000000000000001696'>
<reportstatus>
<status>success</status>
</reportstatus>
<reportimage>
<cameraid>front</cameraid>
<cameratype>front</cameratype>
<windowid>window_002</windowid>
<imageid>000001A.1</imageid>
<autocolordetected>false</autocolordetected>
<autocoloramount>1</autocoloramount>
<autocolorthreshold>20</autocolorthreshold>
<compressionmode>none</compressionmode>
<deskewstatus>success</deskewstatus>
<imagefilename>C:\ProgramData\kds_kodak\kds_i2900\twain\log.20120622172913994\hippo\tmp\hip631C.tmp</imagefilename>
<imageformat>bw</imageformat>
<imageoffsetx>324</imageoffsetx>
<imageoffsety>1404</imageoffsety>
<imagewidth>10296</imagewidth>
<imageheight>13170</imageheight>
<imagesize>471925</imagesize>
<imageresolutionx>200_dpi</imageresolutionx>
<imageskewangle>2197</imageskewangle>
<invertcolor>false</invertcolor>
<binarizationquality>normal</binarizationquality>
<blankimagecontent>-1</blankimagecontent>
<region>
<imageoffsetx>324</imageoffsetx>
<imageoffsety>1404</imageoffsety>
<imagewidth>10296</imagewidth>
<imageheight>13170</imageheight>
<imageskewangle>2197</imageskewangle>
<imageorthogonalangle>0_degrees</imageorthogonalangle>
</region>
<imagetype><![CDATA[normal]]></imagetype>
<multifeed><![CDATA[false]]></multifeed>
<patchdetected><![CDATA[false]]></patchdetected>
<printedstring><![CDATA[]]></printedstring>
<printerindex><![CDATA[0]]></printerindex>
<outputimagecount>1</outputimagecount>
<outputsheetcount>1</outputsheetcount>
<outputsheetimagecount>1</outputsheetimagecount>
</reportimage>
</task>
*/
#endif // KDSCUST_H